Hi, with my new skystar2 2.6D I've a problem when for some reason a reception from for example Pro7 (astra 19.2e) gets in trouble. Vdr reports: Sep 16 19:34:32 jarada jarada vdr: [14014] TS buffer on device 1 thread started (pid=13788, tid=14014) Sep 16 19:34:33 jarada jarada vdr: [13792] frontend 0 lost lock on channel 1017, tp 212480 Sep 16 19:34:33 jarada jarada vdr: [13792] frontend 0 regained lock on channel 1017, tp 212480 Sep 16 19:34:53 jarada jarada vdr: [13792] frontend 0 lost lock on channel 1017, tp 212480 Sep 16 19:34:53 jarada jarada vdr: [13792] frontend 0 regained lock on channel 1017, tp 212480 When this happens, it is impossible to tune to other channels like ARD, .. . Femon reports then for ARD: SNR 0xbfda 75% , BER = 0 Only restarting vdr resolves this issue. The above situation applies to drivers from kernel 2.6.17.6 and to those pulled today via hg. The driver for this PCI card dosn't seems to survive a S3 sleep state. Needs unload/reload. USB cingeryT2 drivers survives S3 sleep. lsmod: Module Size Used by stv0299 10120 1 b2c2_flexcop_pci 7704 0 b2c2_flexcop 28300 1 b2c2_flexcop_pci radeon 109728 1 drm 62356 2 radeon it87 18596 0 hwmon_vid 2816 1 it87 hwmon 2452 1 it87 eeprom 5520 0 i2c_isa 3456 1 it87 cinergyT2 12804 0 snd_cmipci 30592 1 snd_opl3_lib 9088 1 snd_cmipci snd_hwdep 7044 1 snd_opl3_lib snd_mpu401_uart 6528 1 snd_cmipci snd_rawmidi 20256 1 snd_mpu401_uart dvb_core 74536 3 stv0299,b2c2_flexcop,cinergyT2 firmware_class 8064 1 b2c2_flexcop dvb_pll 11908 1 b2c2_flexcop i2c_i801 7820 0 intel_agp 20252 1 agpgart 28208 2 drm,intel_agp rtc 10932 1 sbp2 21640 0 ohci1394 31664 0 ieee1394 86964 2 sbp2,ohci1394 -- Stefan Lucke _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb