On Thu, Sep 14, 2006 at 01:30:40PM +0200, Halim Sahin wrote: > On Do, Sep 14, 2006 at 11:57:46 +0200, w-thiel@xxxxxxx wrote: > > Manually? > > The service description tables on 42 east are often quite wrong in what > > they report. > > Thats really bad. > You mean that I must adjust these thing after a scan manually? > Yes. > Vdr gets wrong vallues while adding new transponders etc and I don't > want to edit the list every week because the turkish broatcaster often > change the transponders. > If you don't use DiSEqC you can just leave the wrong values as they are. Or convince vdr somehow to move the dish to 42 degrees east, if it finds 0 degrees in the channels.conf. Or: disable automatic updates of the channels.conf file and only allow it every now and then. > Isn't there another scan utility? > They would give the same result, as the transmitted info is simply wrong. > What about home sat receivers? > They don't need anything after a channelscan!!! > They will work only if they don't use DiSEqC to move a dish. Or they will use some tricks in their software. You could do the same: patching dvbscan and vdr to replace 0 with 42e and hope that other sat positions you use don't have wrong infos as well. Wolfgang _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
