Hi All, =========== Into ================= I apologise for confusion. I am new to lists, dont like asking for help. I was asked to create a new subject for my post, to make it easier to follow, so I have changed the subject again(!!!). I have a VIA mini-ITX CN700 and Twinhan 1025 DVB-S card. I have been using the Twinhan 1022 card for a while, with a lot of success. The 1025 is giving me a head ache. My distro is Fedora 4, but I use vanilla kernels from kernel.org and the 1022 card worked fine on the FC kernel. I have tried the steps below with 2.6.17.8, 10 and 11 and have the same results. Thanks to Mike, Dave and Manu for the help thus far. The "make distclean" was not the miracle answer. =========== Kernel setup ============== # uname -a Linux ptqtest2 2.6.17.10 #2 Sat Sep 9 07:49:41 SAST 2006 i686 i686 i386 GNU/Linux # tar -jxvf linux-2.6.17.10.tar.bz2 # make menuconfig (set DVB as Modules) # make -j2 && make modules && make modules_install # cp bzImage /boot/vmlinuz # mkinitrd /boot/initrd-2.6.17.10 2.6.17.10 edit /boot/grub/menu.lst # reboot ============ V4L-DVB setup ============== # hg clone http://linuxtv.orf/hg/v4l-dvb (which sometimes give service not known error) # cd v4l-dvb # make distclean # make all # make install # reboot ============ tuning card =============== # modprobe dvb-core # modprobe bttv card=113 # modprobe dvb-bt8xx # modprobe dst verbose=4 ============ Devices created =========== # ls -l /dev/dvb/adapter0/ total 0 crw-rw---- 1 root root 212, 4 Sep 9 08:24 demux0 crw-rw---- 1 root root 212, 5 Sep 9 08:24 dvr0 crw-rw---- 1 root root 212, 7 Sep 9 08:24 net0 ============ Lets szap it =============== # szap -c /etc/channels.conf xxxxxxxxxxxxx reading channels from file '/etc/channels.conf' zapping to 2 'xxxxxxxxxxxx': sat 0, frequency = 11081 MHz H, symbolrate 14876000, vpid = 0x1fff, apid = 0x1fff sid = 0x0000 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' opening frontend failed: No such file or directory ============ lspcc -vv ============ 00:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Subsystem: Twinhan Technology Co. Ltd VisionPlus DVB card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at fdfff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Subsystem: Twinhan Technology Co. Ltd VisionPlus DVB Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at fdffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- ========== dmesg ================= via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 eth0: VIA Rhine II at 0xfdffb000, 00:30:18:a6:95:01, IRQ 10. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:11.5 to 64 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Linux video capture interface: v2.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 11, latency: 32, mmio: 0xfdfff000 bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001 bttv0: using: Twinhan DST + clones [card=113,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00d500ff [init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:00:08.1[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions. bt878(0): Bt878 (rev 17) at 00:08.1, irq: 11, latency: 32, memory: 0xfdffe000 ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ................... DVB: registering new adapter (bttv0). DVB: Unable to find symbol dst_attach() frontend_init: Could not find a Twinhan DST. dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem 1822/0001 ========== lsmod ================== Module Size Used by vfat 13056 1 fat 53660 1 vfat dst 29064 0 dvb_bt8xx 17156 0 dvb_pll 14468 1 dvb_bt8xx dvb_core 82088 2 dst,dvb_bt8xx parport_pc 28268 1 lp 13504 0 parport 37576 2 parport_pc,lp autofs4 21892 2 rfcomm 38292 0 l2cap 24704 5 rfcomm bluetooth 49380 4 rfcomm,l2cap sunrpc 156836 1 video 15492 0 button 6800 0 battery 9604 0 ac 5124 0 ipv6 254080 12 ohci1394 35376 0 usb_storage 72256 2 ieee1394 301400 1 ohci1394 uhci_hcd 24204 0 ehci_hcd 33288 0 bt878 10828 2 dst,dvb_bt8xx tuner 61864 0 bttv 177980 2 dvb_bt8xx,bt878 video_buf 25732 1 bttv ir_common 28676 1 bttv compat_ioctl32 1280 1 bttv i2c_algo_bit 9480 1 bttv btcx_risc 5128 1 bttv tveeprom 14736 1 bttv videodev 24960 1 bttv v4l1_compat 13444 1 videodev v4l2_common 23168 3 tuner,bttv,videodev shpchp 40888 0 i2c_viapro 9364 0 i2c_core 22016 8 dst,dvb_bt8xx,dvb_pll,tuner,bttv,i2c_algo_bit,tveeprom,i2c_viapro snd_via82xx 28824 0 gameport 15880 1 snd_via82xx snd_ac97_codec 92576 1 snd_via82xx snd_ac97_bus 2688 1 snd_ac97_codec snd_seq_dummy 4100 0 snd_seq_oss 33252 0 snd_seq_midi_event 7808 1 snd_seq_oss snd_seq 52428 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_pcm_oss 41888 0 snd_mixer_oss 18560 1 snd_pcm_oss snd_pcm 87940 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss snd_timer 24068 2 snd_seq,snd_pcm snd_page_alloc 10376 2 snd_via82xx,snd_pcm snd_mpu401_uart 8576 1 snd_via82xx snd_rawmidi 25504 1 snd_mpu401_uart snd_seq_device 8716 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi snd 53856 11 snd_via82xx,snd_ac97_codec,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 10208 1 snd via_rhine 25220 0 mii 6144 1 via_rhine floppy 62204 0 dm_snapshot 17708 0 dm_zero 2176 0 dm_mirror 22196 0 dm_mod 57364 6 dm_snapshot,dm_zero,dm_mirror sata_via 8324 2 libata 70796 1 sata_via Thanks Cornel. > > hi > something is difficult to me, your are on diff. threads with this > problem. difficult to follow. > i wrote a email yesterday, but didn't send and throw it away after i > realized that you are on diff. threads... > > ?????????? > > Cornel van Lingen (PDT) wrote: >> Hi All, >> >> I think I have slept 8 hours in this week. >> > best to do it now ! > but please send me/do first: > - your os ( i'm quit not sure: FC5 ?) [1] > - your card: iirc TwinHan 1025 DVB-S ? USB/PCI ? > - exact model name: more than TwinHan ... ??? > - lspci -vv output > > > [1] else goto [2] > if so try: > all as USER > - cd <your-kernel-src> (best with 2.6.17.11) > > [maybe someone can *jump in here* to give a better advise] > > - make mrproper > - check your Makefile => EXTRAVERSION= ???; > change it or del your old selfmade kernel (grub-entries, files > under /boot and /lib/modules/<your-kernel> > > - make oldconfig ! (all yes or modules) > - make xconfig (... menuconfig, or ...) > check the entries under MULTIMEDIA DEVICES > i suggest to leave them to the defaults made by oldconfig > > [maybe someone can *jump in here* to give a better advise] > > - make && make modules > > as ROOT now > - make modules && make install > - check your firmware dir, move all, what's not needed out of the way; > maybe get a new one (kernel-doc's: get_dvb_firmware) > - reboot > > save and send me your > dmesg (dmesg >> dmesg-$(uname -r) > and > lsmod (lsmod >> lsmod-$(uname -r) > > if all doesn't help and if don't get any further idea (after reading > your dmesg/lsmod) > > someone *must* jump in here to give a better advise... > > > [2] > start a *unique* thread (<your-card:exact model> <your problem>) > > clear up your head. sleep ! > > > ronald > > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
