Thomas Börkel wrote:
HI!
I am using KNC ONE DVB-C (budget_av) with kernel 2.6.16.
Whatever I do (different cables, changing amplification, switching
channels), czap always reports a ber of 195000.
Recently I got a second card and it's the same there. Only on one
occasion, I suddenly had a ber of 50 on the new card. After reboot, it
was back to 195000.
Now I installed recent (1-2 weeks old) development version of the
drivers and now one card has again always a ber of 195000 and the other
one has always 194ef2.
My question is: Is the ber reliable from this card?
Thanks!
Thomas
schorpp@tom1:~$ femon
FE: Philips TDA10021 DVB-C (DVBC)
status SCVYL | signal 8b8b | snr f3f3 | ber 0000001e | unc ffffffff | FE_HAS_LOCK
status SCVYL | signal 8b8b | snr f2f2 | ber 0000001e | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal 8b8b | snr f2f2 | ber 0000001e | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal 8b8b | snr f2f2 | ber 0000001e | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal 8b8b | snr f3f3 | ber 0000001e | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal 8b8b | snr f2f2 | ber 0000001e | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal 8b8b | snr f3f3 | ber 0000001e | unc 00000000 | FE_HAS_LOCK
schorpp@tom1:~$ uname -r
2.6.17.10
its static here too on every channel.
and signal level is not 100% like with vendors app under windows.
but doesnt scare me, found only one channel in our network with slight
probs.
im very satisfied with this device knc1 c plus :)
y
tom
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
