I tried to tune "Kanal 5 Ukraine", but all tries failed. I know than it's not a dish or cable problem, because I seen the channel using another card based on SAA7134 chip (TV COMPRO VM S350) My card now is Twinhan 1025 (bt878) Also channel params are valid ( http://5tv.com.ua/satelit/ ) root@voodle-dev:/root/.szap# dvbtune -f 11766000 -p H -s 27500 -c 0 Using DVB card "DST DVB-S" tuning DVB-S to L-Band:0, Pol:H Srate=27500000, 22kHz=off polling.... Getting frontend event FE_STATUS: polling.... I confused about "L-Band:0,", should it be 11766000 instead of zero? Next I tried to scan using fresh "scan" utility (get sources from cvs) root@voodle-dev:/root/.szap# scan Sirius-2 scanning Sirius-2 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 11766000 H 27500000 3 >>> tune to: 11766:h:0:27500 WARNING: >>> tuning failed!!! >>> tune to: 11766:h:0:27500 (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. What does mean zero in the "11766:h:0:27500" string? JFI Sirius-2 file: # Sirius 2 (4.8E) # freq pol sr fec S 11766000 H 27500000 3/4 Any ideas what's wrong? -- Best regards, Nick Fedchik _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
