Unfortunately I dont know much about the LNB. I went and remove it from the
dish but the identification sticker has worn away. It came from a common 18
inch DirecTV dish. there are two LNB's in there, I think, because there are
two coax outs. I'm only using one at the moment because I dont have a
disecq.
Do you thnk this LNB w]ll cause my defines in dvbtune.c to need changing?
Best,
Dave Schile
Yes, try setting the high and low defines to the same value in three
different compile tests. 10.6, 10.75, 11.25. Leave the LNB switch
setting alone.
Steve
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
