Dear, I have installed the pinnacle pctv USB stick (recognized as eb1a:2870 eMPIA Technology, Inc.), it works very well with em28xx, em2880-dvb modules. When I plug this stick I have the following message with dmesg : [17179593.240000] em28xx v4l2 driver version 0.0.1 loaded [17179593.240000] em28xx new video device (eb1a:2870): interface 0, class 255 [17179593.240000] em28xx #0: Alternate settings: 8 [17179593.240000] em28xx #0: Alternate setting 0, max size= 0 [17179593.240000] em28xx #0: Alternate setting 1, max size= 0 [17179593.240000] em28xx #0: Alternate setting 2, max size= 1448 [17179593.240000] em28xx #0: Alternate setting 3, max size= 2048 [17179593.240000] em28xx #0: Alternate setting 4, max size= 2304 [17179593.240000] em28xx #0: Alternate setting 5, max size= 2580 [17179593.240000] em28xx #0: Alternate setting 6, max size= 2892 [17179593.240000] em28xx #0: Alternate setting 7, max size= 3072 [17179593.924000] input: em2880/em2870 remote control as /class/input/input4 [17179593.924000] em28xx-input.c: remote control handler attached [17179594.184000] tuner 2-0060: chip found @ 0xc0 (em28xx #0) [17179594.224000] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12 81 00 6a 22 00 00 [17179594.224000] em28xx #0: i2c eeprom 10: 00 00 04 57 02 0d 00 00 00 00 00 00 00 00 00 00 [17179594.224000] em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 02 00 00 00 00 00 5b 00 00 00 [17179594.224000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 1a f8 45 49 [17179594.224000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179594.224000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179594.224000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [17179594.224000] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00 30 00 20 00 44 00 [17179594.224000] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [17179594.224000] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179594.224000] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179594.224000] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179594.224000] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179594.224000] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179594.224000] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179594.224000] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [17179594.792000] em28xx-video.c: setting DVB lock [17179594.792000] em28xx-video.c: releasing DVB lock [17179594.792000] em28xx #0: Found Pinnacle PCTV DVB-T [17179594.792000] usbcore: registered new driver em28xx So I think it can handle the remote control, I see a new "interface" in /sys/class/input/input4. But I don't know how to bind the keys. Furthermore I saw ir_codes_pinnacle2 array in http://linuxtv.org/hg/~mrechberger/v4l-dvb?f=eb8e669957a6;file=linux/drivers/media/common/ir-keymaps.c;style=gitweb Any help would be very useful Kind Regards, Jerome _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
