Hi, On Tue, 27 Jun 2006, Stonie Cooper wrote: > I have a new dual-voltage B2C2 DVB-S card - r2.7U; running the 2.6.16 kernel, > when doing: > > modprobe b2c2-flexcop-pci > > I received no complaints in dmesg, but no warm fuzzy about detecting a device, > either. lspci shows this for the device: > > 01:00.0 Network controller: Gammagraphx, Inc. Unknown device 0000 (rev 02) > > Also, any attempt at szap, etc., yields failure to find a frontend. B2C2 > supplied me with a IDT1000-PN1010 driver for the frontend - and it loads via > insmod - but I still don't get a frontend. This is strange. > Has anyone else tried this card? I have two samples at home, but currently there is no LinuxTV-OpenSource-driver for that. The PN1010 is identical to the s5h1420 - it is just another brand name. Support for the IDT1000 is missing. I have everything there to do it, but absolutely no time. If someone wants to give the development a try, I can probably help. regards, Patrick. -- Mail: patrick.boettcher@xxxxxxx WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
