* Andrew de Quincey schrieb am 28.06.06, um 20:35 Uhr:
> OK, can you try the following:
>
> in drivers/media/dvb/ttpci/budget-av.c/frontend_init.c():
>
> There is a section:
> switch (saa->pci->subsystem_device) {
> case SUBID_DVBS_KNC1_PLUS:
> case SUBID_DVBC_KNC1_PLUS:
> case SUBID_DVBT_KNC1_PLUS:
> // Enable / PowerON Frontend
> saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
> saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
> break;
> }
>
>
> Add "case SUBID_DVBS_CYNERGY1200N:" to that list and see if it works now.
Yes, this works, i can confirm that the patch works with -rc5 and
2.6.17.1. Thank you very much.
> I'm wondering what the difference between your card and the others is - any
> ideas?
Well, i guess it is a new revision of the Cinergy DVB-S 1200. The most
visible difference to the pictures of older Cinergy DVB-S 1200 like
this one: http://www.vdr-wiki.de/wiki/index.php/Bild:Cinergy1200DVB-s.JPG
is that my card has a LNB-Out-Connector and the PCI-connector of my
card is set to support both voltages, 3,3V and 5V.
Regards,
Thomas
--
Thomas Schmidt, Debian VDR Team
http://pkg-vdr-dvb.alioth.debian.org/
Attachment:
signature.asc
Description: Digital signature
_______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
