Hi! > > > > I tried to update kernel to 2.6.17, but had no success with my NOVA-S > > > > card. Under 2.6.16 it works fine, but with 2.6.17 dvbstream and > > > > mplayer fails with following message : > > > > > > What is your setup - are you using DISEQC at all? > > > > Yes, 2 LNB-s. One for Astra and one for Hotbird. Strong DiSEqC switch. > > > > > Can you send the output of lspci -vn please. > > [snip] > > Right ok, I've had another report of DISEQC related problems.. is the issue > that you can only see channels on one of the satellites now? No. As i wrote earlier, if i repeat the command (dvbstream or. mplayer) several times it sometimes works. For both LNBs. So yes, i can switch between them. But i have this problem with both LNBs. > Ah, because its a FF card, you'll need to send me the output of dmesg from > when the card is loaded so I can work out the exact details. --- >>> --- >>> --- >>> --- [dice@moon ~]$ lsmod | grep budget budget 10048 5 s5h1420 8068 1 budget l64781 6340 1 budget ves1820 5956 1 budget budget_core 7300 1 budget saa7146 14408 2 budget,budget_core ttpci_eeprom 1984 1 budget_core stv0299 9608 1 budget tda8083 5124 1 budget ves1x93 5764 1 budget dvb_core 77248 3 budget,budget_core,stv0299 i2c_core 17232 9 budget,s5h1420,l64781,ves1820,budget_core,ttpci_eeprom,stv0299,tda8083,ves1x93 --- <<< --- <<< --- <<< --- --- >>> --- >>> --- >>> --- Linux version 2.6.16 (dice@moon) (gcc version 4.0.3) #1 PREEMPT Fri Jun 9 19:24:33 CEST 2006 [...] saa7146: register extension 'budget dvb'. [...] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 3 (level, low) -> IRQ 3 saa7146: found saa7146 @ mem e0a74000 (revision 1, irq 3) (0x13c2,0x1003). DVB: registering new adapter (TT-Budget/WinTV-NOVA-S PCI). [...] adapter has MAC addr = 00:d0:5c:1f:6a:d2 [...] DVB: registering frontend 0 (ST STV0299 DVB-S)... [...] --- <<< --- <<< --- <<< --- Thanks, Gergely _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
