On Sun, 2006-06-25 at 22:52 +0100, Andrew de Quincey wrote: > On Sunday 25 June 2006 12:26, Peter Schram wrote: > > I'm desperately trying to get my KNC1 DVB-C with CI and Alphacrypt CAM > > working. So far nothing is working. > > > > Do I need a firmware loading with this card? All drivers seem to load > > ok, but I can't get any mpeg out of the card. > > > > I posted earlier on the list with a lengthy log explanation, but got no > > reply unfortunately. Is the above combination possible to use, or am I > > trying the impossible? > > no - no firmware should be necessary. I think the alphacrypt cam should work > on that board. Ok, that is good to know. > Do you get data normally - i.e. is the card fully functional for receiving > data without a CAM? I think so. When using the board without the cam inserted I got non-zero length mpeg-files, but since all channels are encrypted over here, I get no decent output. The file is not playable with mplayer for instance. With the cam I still get al lock with czap, but all files are zero length. I have a overview of all steps and commands I have tried written down in this post: http://www.linuxtv.org/pipermail/linux-dvb/2006-June/011029.html If there are things I need to try or debugging that needs to be done, please let me know. I'm out of options at the moment, however. I don't know how to enable more (debug)logging to investigate further. Regards, Peter -- Peter Schram <mail@xxxxxxxxxxxxxx> _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
