#Applies against: 2.6.17
#Signed-off-by: Uwe Bugla <uwe.bugla@xxxxxx>
#Changes: wipe out uncommented material
--- a/drivers/media/dvb/frontends/mt352.c 2006-03-20 06:53:00
+++ b/drivers/media/dvb/frontends/mt352.c 2006-05-27 19:43:00
@@ -274,20 +274,13 @@
default:
return -EINVAL;
}
-
-
buf[0] = TPS_GIVEN_1; /* TPS_GIVEN_1 and following registers */
-
buf[1] = msb(tps); /* TPS_GIVEN_(1|0) */
buf[2] = lsb(tps);
-
- buf[3] = 0x50; // old
+ buf[3] = 0x50;
-// buf[3] = 0xf4; // pinnacle
-
mt352_calc_nominal_rate(state, op->bandwidth, buf+4);
mt352_calc_input_freq(state, buf+6);
state->config.pll_set(fe, param, buf+8);
-
mt352_write(fe, buf, sizeof(buf));
if (state->config.no_tuner) {
/* start decoding */
@@ -410,19 +401,14 @@
{
struct mt352_state* state = fe->demodulator_priv;
int s0, s1, s3;
-
/* FIXME:
- *
* The MT352 design manual from Zarlink states (page 46-47):
- *
* Notes about the TUNER_GO register:
- *
* If the Read_Tuner_Byte (bit-1) is activated, then the tuner status
* byte is copied from the tuner to the STATUS_3 register and
* completion of the read operation is indicated by bit-5 of the
* INTERRUPT_3 register.
*/
-
if ((s0 = mt352_read_register(state, STATUS_0)) < 0)
return -EREMOTEIO;
if ((s1 = mt352_read_register(state, STATUS_1)) < 0)
--
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
