Could you update the repository again and reload the em28xx module? thanks, Markus On 6/5/06, Markus Rechberger <mrechberger@xxxxxxxxx> wrote:
you could scan for a channel in windows and capture the USB Stream while doing that. If there's a difficult calculation behind it we could build a frequency map using the data you are able to capture in Windows. http://linuxtv.org/v4lwiki/index.php/USBVideo try to set up a site like: http://www.kaiser-linux.li/index.php/Linux_and_TV Markus > On 6/5/06, James Cameron <quozl@xxxxxxxxxxxxx> wrote: > > On Sun, Jun 04, 2006 at 06:36:54PM +0200, Gunther Mayer wrote: > > > Try "modprobe em28xx" and post the results. > > > > Here's the results of "modprobe em28xx i2c_scan=1" > > > > Linux video capture interface: v1.00 > > em28xx v4l2 driver version 0.0.1 loaded > > em28xx new video device (eb1a:2870): interface 0, class 255 > > em28xx #0: Alternate settings: 8 > > em28xx #0: Alternate setting 0, max size= 0 > > em28xx #0: Alternate setting 1, max size= 0 > > em28xx #0: Alternate setting 2, max size= 1448 > > em28xx #0: Alternate setting 3, max size= 2048 > > em28xx #0: Alternate setting 4, max size= 2304 > > em28xx #0: Alternate setting 5, max size= 2580 > > em28xx #0: Alternate setting 6, max size= 2892 > > em28xx #0: Alternate setting 7, max size= 3072 > > em28xx #0: Your board has no eeprom inside it and thus can't > > em28xx #0: be autodetected. Please pass card=<n> insmod option to > > em28xx #0: workaround that. Redirect complaints to the vendor of > > em28xx #0: the TV card. Generic type will be used.em28xx #0: Best regards, > > em28xx #0: -- tux > > em28xx #0: em28xx #0: Here is a list of valid choices for the card=<n> insmod option: > > em28xx #0: card=0 -> Unknown EM2800 video grabber > > em28xx #0: card=1 -> Generic EM2820 video grabber > > em28xx #0: card=2 -> Terratec Cinergy 250 USB > > em28xx #0: card=3 -> Pinnacle PCTV USB 2 > > em28xx #0: card=4 -> Hauppauge WinTV USB 2 > > em28xx #0: card=5 -> MSI VOX USB 2.0 > > em28xx #0: card=6 -> Terratec Cinergy 200 USB > > em28xx #0: card=7 -> Leadtek Winfast USB II > > em28xx #0: card=8 -> Kworld USB2800 > > em28xx #0: card=9 -> Pinnacle Dazzle DVC 90 > > em28xx #0: card=10 -> Hauppauge WinTV HVR 900 > > em28xx #0: card=11 -> Terratec Hybrid XS > > em28xx #0: card=12 -> Kworld PVR TV 2800 RF > > em28xx #0: card=13 -> Terratec Prodigy XS > > em28xx #0: card=14 -> Videology 20K14XUSB USB2.0 > > em28xx #0: card=15 -> Usbgear VD204v9 > > em28xx #0: card=16 -> Terratec Cinergy T XS > > em28xx #0: card=17 -> Generic EM2870 video grabber > > em28xx #0: card=18 -> Pinnacle PCTV DVB-T > > em28xx #0: card=19 -> Generic EM2881 video grabber > > em28xx #0: card=20 -> DNT DA2 Hybrid > > em28xx #0: card=21 -> Pinnacle Hybrid Pro > > em28xx #0: card=22 -> Terratec Hybrid XS Secam > > em28xx #0: card=23 -> Hercules Smart TV USB 2.0 > > em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 40 12 62 40 6a 1c 00 00 > > em28xx #0: i2c eeprom 10: 00 00 04 57 0e 1d 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom 20: 04 00 00 00 f0 10 01 00 00 00 00 00 5b 00 00 00 > > em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 > > em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 1c 03 56 00 69 00 > > em28xx #0: i2c eeprom 70: 64 00 65 00 6f 00 4d 00 61 00 74 00 65 00 20 00 > > em28xx #0: i2c eeprom 80: 55 00 33 00 00 00 63 00 65 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > EEPROM ID= 0x9567eb1a > > Vendor/Product ID= eb1a:2870 > > No audio on board. > > 500mA max power > > Table at 0x04, strings=0x1c6a, 0x0000, 0x0000 > > em28xx #0: found i2c device @ 0x1e [zl10353/mt352 dvb-t demodulator] > > em28xx #0: found i2c device @ 0xa0 [eeprom] > > em28xx #0: Found Generic EM2870 video grabber > > usbcore: registered new driver em28xx > > > > -- > > James Cameron mailto:quozl@xxxxxxxxxxxxx http://quozl.netrek.org/ > > > > _______________________________________________ > > > > linux-dvb@xxxxxxxxxxx > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > > -- > Markus Rechberger > -- Markus Rechberger
-- Markus Rechberger _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
