HI,
Necik wrote:
Hello,
I've just bought DVB card LifeView FlyDVB-T PCI, model LR301. I'd like
to run it under Linux. I've downloaded kernel 2.6.16.16 from kernel.org
and compiled support for saa7134. But it seems that my card is not in
supported list in kernel sources. This is my dmesg:
saa7134[0]: quirk: PCIPCI_NATOMA
May 20 00:25:55 kompl kernel: saa7134[0]: found at 0000:00:0b.0, rev:
1, irq: 10, latency: 64, mmio: 0xe8010000
May 20 00:25:55 kompl kernel: saa7134[0]: subsystem: 5168:0301, board:
UNKNOWN/GENERIC [card=0,autodetected]
May 20 00:25:55 kompl kernel: saa7134[0]: board init: gpio is 10000
May 20 00:25:55 kompl kernel: saa7134[0]: i2c eeprom 00: 68 51 01 03 54
20 1c 00 43 43 a9 1c 55 d2 b2 92
May 20 00:25:55 kompl kernel: saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff
20 ff ff ff ff ff ff ff ff ff ff
May 20 00:25:55 kompl kernel: saa7134[0]: i2c eeprom 20: 01 40 01 02 03
ff 01 03 08 ff 01 08 ff ff ff ff
May 20 00:25:55 kompl kernel: saa7134[0]: i2c eeprom 30: ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff
May 20 00:25:55 kompl kernel: saa7134[0]: i2c eeprom 40: ff 1b 00 c0 ff
10 01 01 ff ff ff ff ff ff ff ff
May 20 00:25:55 kompl kernel: saa7134[0]: i2c eeprom 50: ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff
May 20 00:25:55 kompl kernel: saa7134[0]: i2c eeprom 60: ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff
May 20 00:25:55 kompl kernel: saa7134[0]: i2c eeprom 70: ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff
May 20 00:25:55 kompl kernel: saa7134[0]: registered device video0 [v4l2]
May 20 00:25:55 kompl kernel: saa7134[0]: registered device vbi0
So I looked around and I found this using Google:
http://www.uwsg.iu.edu/hypermail/linux/kernel/0603.2/1471.html
It seems that my card _is_ supported but this patch is not included in
kernel 2.6.16.16. I tried to apply patch from above webpage but I
wasn't successful:
root@kompl:/usr/src/linux# patch -b -p1 < FlyDVB-T.patch
patching file Documentation/dvb/get_dvb_firmware
patch: **** malformed patch at line 7: use File::Temp qw/ tempdir /;
Can anybody help me please? How can I get my card working under Linux?
Thanks for help
Jiri
2 reasons why the patch might not appy:
1) Patches like this are intended to apply to the recent development
repository. It might be different from the kernel source.
2) Many mail tools reformat the text and i.e. replacing tabs by spaces
makes patch fail.
The solution is: go to www.linuxtv.org and get a snapshot from there.
You will also find instructions there.
Good luck
Hartmut
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
