I've got a Pinnacle 300i, which I can't get working. I was on ubuntu breezy stock (2.6.12-10-k7) kernel, which didn't work, so I tried applying patches i found on the mailing list, to no avail.
Last night I compiled latest 2.6.12-ck9, which behaved identically to the old kernel (with regard to the pinnacle). I've just tried the patch from
http://www.linuxtv.org/pipermail/linux-dvb/2006-May/010152.html
there, but that makes no difference either. So I'm currently running latest hg pull, with that patch, and i get these messages in dmesg
(these have been the same regardless of what kernel/patch i've been running):
On module load (modprobe saa7134_dvb):
[4298444.405000] saa7130/34: v4l2 driver version 0.2.14 loaded
[4298444.415000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 5 (le vel, low) -> IRQ 5
[4298444.415000] saa7134[0]: found at 0000:00:09.0, rev: 1, irq: 5, latency: 32, mmio: 0xe2000000
[4298444.415000] saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB -T + PAL [card=50,autodetected]
[4298444.416000] saa7134[0]: board init: gpio is 880e000
[4298444.556000] tuner 0-0060: Chip ID is not zero. It is not a TEA5767
[4298444.556000] tuner 0-0060: chip found @ 0xc0 (saa7134[0])
[4298444.570000] tuner 0-0060: microtune: companycode=3cbf part=42 rev=13
[4298444.578000] tuner 0-0060: microtune MT2050 found, OK
[4298444.583000] tda9887 0-0043: chip found @ 0x86 (saa7134[0])
[4298444.613000] saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
[4298444.613000] saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
[4298444.613000] saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
[4298444.613000] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4298444.613000] saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
[4298444.613000] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4298444.613000] saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 1e 56 89 ff ff ff ff ff ff ff ff
[4298444.613000] saa7134[0]: i2c eeprom 70: 00 30 8d 18 b4 d8 ff ff 74 48 ff ff ff ff ff ff
[4298444.723000] saa7134[0]: registered device video0 [v4l2]
[4298444.751000] saa7134[0]: registered device vbi0
[4298444.768000 ] saa7134[0]: pinnacle 300i dvb setup
[4298444.771000] DVB: registering new adapter (saa7134[0]).
[4298444.771000] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
on tuning:
/usr/gm@kimiko:~$ scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-EmleyMoor scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-EmleyMoor
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 673833330 0 3 3 1 0 0 0
>>> tune to: 673833330:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_3_4:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 673833330:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_3_4:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
and now in dmesg:
[4298508.327000] saa7134[0]: mt352_pinnacle_init called
[4298508.365000] saa7134[0]: mt352_pinnacle_init called
[4298509.227000] saa7134[0]: mt352_pinnacle_init called
[4298510.087000] saa7134[0]: mt352_pinnacle_init called
[4298510.401000] saa7134[0]: mt352_pinnacle_init called
[4298511.263000] saa7134[0]: mt352_pinnacle_init called
[4298512.123000] saa7134[0]: mt352_pinnacle_init called
[4298512.984000] saa7134[0]: mt352_pinnacle_init called
[4298513.844000] saa7134[0]: mt352_pinnacle_init called
[4298514.705000] saa7134[0]: mt352_pinnacle_init called
[4298515.565000] saa7134[0]: mt352_pinnacle_init called
[4298516.426000] saa7134[0]: mt352_pinnacle_init called
[4298517.287000] saa7134[0]: mt352_pinnacle_init called
Any ideas what's going on here?
(The card works in Windows, so I don't think its a DOA)
Thanks,
Greg Manning
_______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
