Hi, I've got this USB DVB-T receiver: ID 10b8:0bc7 DiBcom DiBcom USB2.0 DVB-T reference design (MOD3000P) (warm) First, I was using the drivers shipped with SUSE 10, then switched to the drivers "from the mercurian tree" (http://linuxtv.org/hg/) [first thing to say: the receiver is working with windows, thus the antenna setup and the reception in this area is fine] well, If using the firmware from http://linuxtv.org/downloads/firmware/dvb-usb-dibusb-6.0.0.8.fw the card seems to be recognised, changes from "cold" to "warm" and the /dev/dvb/adapter0/* devices are set up, at least as far as I can tell: /dev/dvb/adapter0/ crw-rw---- 1 root video 212, 4 Apr 20 17:09 demux0 crw-rw---- 1 root video 212, 5 Apr 20 17:09 dvr0 crw-rw---- 1 root video 212, 3 Apr 20 17:09 frontend0 crw-rw---- 1 root video 212, 7 Apr 20 17:09 net0 well. so far, so good. but - neither dvbscan can tune to any transponders (using initial files dvb-t/au-[sS]ydney*, btw: why are some files small letters and some capital?) - nor tzap (using channels-conf/dvb-t/au-Sydney*) can tune dvbscan tells "WARNING: >>> tuning failed!!!" and tzap gives this: tuning to 571500000 Hz video pid 0x00a1, audio pid 0x0051 status 00 | signal 0000 | snr ffff | ber 001fffff | unc 0000ffff | status 00 | signal ff3f | snr 0001 | ber 001fffff | unc 0000ffff | well, on the driver CD there are the files modload2.{inf,sys} and the inf file has the line DriverVer = 12/15/2005,6.0.0.12 so I guess that the driver has a newer version 6.0.0.12 of the firmware (needed for my receiver?) but I have no idea how to extract it from the sys file. or is there anything else I am missing? thanks in advance Sergei _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
