Hi
Well, I've just moved house so that I can live in an area with DVB reception :-)
I've replaced the hard drive in my Linux box so that I can have a lovely clean installation of MythTV and I've dashed out to the shops and bought a WinTV-Nova-T-USB2.
Unfortunately I'm having trouble getting the thing to work, so I was hoping that some kind soul could help me out.
I'm almost there, but have a problem with no frontend being attached.
I'm using the standard Linux 2.6.15 kernel from the Debian "testing" release. I'm using the DVB modules that come with this as standard.
I'm using the dvb-usb-nova-t-usb2-01.fw firmware, and the little red light comes on!
I've searched the linux-dvb archives but can't find anything similar to this. The only thing on the Wiki relating to this device is that it should work.
Does anyone have any ideas?
Hauppauge WinTV-Nova-T-USB2
On the back it has a label: 93004 LF Rev C1A2 Log 0806
The packaging says that it's a model 1092
Output from "dmesg":
dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge WinTV-NOVA-T usb2).
dvb-usb: MAC address: 00:0d:fe:13:13:13
dvb-usb: no frontend was attached by 'Hauppauge WinTV-NOVA-T usb2'
input: IR-receiver inside an USB DVB receiver as /class/input/input2
dvb-usb: schedule remote query interval to 100 msecs.
dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected.
usbcore: registered new driver dvb_usb_nova_t_usb2
Output from "lsmod":
via 35584 1
drm 64532 2 via
ir_common 9348 0
v4l1_compat 12804 0
video_buf 19716 0
v4l2_common 5888 0
btcx_risc 4744 0
lirc_i2c 8708 1
lirc_dev 13284 1 lirc_i2c
ipv6 222336 12
ndiswrapper 160432 0
jfs 160476 1
sr_mod 16548 0
sbp2 21252 0
scsi_mod 125928 2 sr_mod,sbp2
pcmcia 36028 0
psmouse 32516 0
serio_raw 6660 0
eth1394 18568 0
joydev 9024 0
evdev 8960 0
dvb_usb_nova_t_usb2 6020 0
dvb_usb_dibusb_common 7684 1 dvb_usb_nova_t_usb2
dib3000mc 13184 1 dvb_usb_dibusb_common
dib3000_common 2560 1 dib3000mc
dvb_usb 17672 2 dvb_usb_nova_t_usb2,dvb_usb_dibusb_common
mousedev 10784 1
dvb_core 71848 1 dvb_usb
dvb_pll 10756 2 dvb_usb_dibusb_common,dvb_usb
floppy 54980 0
tda9887 14224 0
msp3400 28464 0
saa7127 11284 0
saa7115 14096 0
rtc 11700 0
tuner 21408 0
tveeprom 13100 0
pcspkr 1924 0
parport_pc 32324 0
parport 31944 1 parport_pc
ivtv 182036 1
firmware_class 9984 3 pcmcia,dvb_usb,ivtv
i2c_algo_bit 8456 1 ivtv
snd_via82xx 25880 0
videodev 9088 1 ivtv
gameport 14216 1 snd_via82xx
i2c_viapro 8084 0
i2c_core 19600 12 lirc_i2c,dib3000_common,dvb_usb,tda9887,msp3400,saa7127,saa7115,tuner,tveeprom,ivtv,i2c_algo_bit,i2c_viapro
snd_ac97_codec 82336 1 snd_via82xx
snd_ac97_bus 2304 1 snd_ac97_codec
snd_pcm 77576 2 snd_via82xx,snd_ac97_codec
snd_timer 21636 1 snd_pcm
snd_page_alloc 10120 2 snd_via82xx,snd_pcm
snd_mpu401_uart 6784 1 snd_via82xx
snd_rawmidi 22560 1 snd_mpu401_uart
snd_seq_device 8204 1 snd_rawmidi
snd 48612 7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
via_ircc 23060 0
via_agp 9472 1
agpgart 31560 2 drm,via_agp
soundcore 9184 1 snd
irda 162492 1 via_ircc
yenta_socket 25356 3
rsrc_nonstatic 12288 1 yenta_socket
pcmcia_core 38032 3 pcmcia,yenta_socket,rsrc_nonstatic
shpchp 40000 0
pci_hotplug 25012 1 shpchp
crc_ccitt 2176 1 irda
ext3 117768 1
jbd 48404 1 ext3
ide_cd 36612 0
cdrom 33568 2 sr_mod,ide_cd
ide_disk 16128 4
via82cxxx 8452 0 [permanent]
generic 4484 0 [permanent]
ide_core 112544 4 ide_cd,ide_disk,via82cxxx,generic
ehci_hcd 29192 0
via_rhine 21124 0
mii 5248 1 via_rhine
uhci_hcd 28432 0
usbcore 113540 6 ndiswrapper,dvb_usb_nova_t_usb2,dvb_usb,ehci_hcd,uhci_hcd
ohci1394 30388 0
ieee1394 88376 3 sbp2,eth1394,ohci1394
thermal 13576 0
processor 23104 1 thermal
fan 4868 0
Output from "ls -l /dev/dvb/adapter0":
total 0
crw-rw---- 1 root video 212, 4 2006-04-17 21:27 demux0
crw-rw---- 1 root video 212, 5 2006-04-17 21:27 dvr0
crw-rw---- 1 root video 212, 7 2006-04-17 21:27 net0
Output from "uname -a":
Linux steevo 2.6.15-1-486 #2 Mon Mar 6 15:19:16 UTC 2006 i686 GNU/Linux
Output from "lsusb -v":
Bus 004 Device 002: ID 2040:9301 Hauppauge Hauppauge WinTV NOVA-T USB2 (warm)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB
2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2040 Hauppauge
idProduct 0x9301 Hauppauge WinTV NOVA-T USB2 (warm)
bcdDevice 0.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 400mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
_______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
