Re: DViCO FusionHDTV DVB-T Lite frontend driver issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Martin Petrovsky wrote:
Thanks for your reply.

I noticed there is a zl10353 module which the cx88_dvb module uses. So does this mean that the cx88-dvb module should be recognising my card?

Maybe the manufacturer has changed the demodulator on the Lite card?

Incidentally a friend of mine has brought the same card (well the packaging is the same) but it has the Zarlink MT352 DVB-T demodulator on it and it all works.
No.

The dvb-bt8xx driver is the one that is meant for your card. Unfortunately, you have a newer version of this board, not yet supported by the linux drivers. The current dvb-bt8xx driver only supports the FusionHDTV Lite based on the mt352, and the FusionHDTV5 Lite, based on lgdt3303 -- The driver needs to be updated in order to support your card with the zl10353.

The change that would be required should be a relatively minor one. I'll put together a patch for you to test... If it works correctly, then I can add it to the official sources for you.

I'll email again when I have the patch ready for testing.

Cheers,

Michael Krufky



_______________________________________________

linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux