Hi all! I've now another question, this time regarding the "dvbstream" application. When tuning to 730000 kHz using "dvbstream" I get two confusing messages: 1. "(in United Kingdom)". I'm in Sweden! How can I change country? 2. Look at the "Event:" row. Frequency "740600000". Thats not the frequency I tuned to but this is incorrect as the given frequency is actually tuned. The "SymbolRate" is also incorrect, but maybe you don't talk about Symbol Rates in DVB-T at all? So everything works as expected, but the output is incorrect. Are somebody maintaining dvbstream or is there other packages out there? Best regards, -- Peter Fassberg ---------------------------------------------------------------------- pf@octopussy:~$ dvbstream -f 730000 -gi 4 -cr 3_4 8192 dvbstream v0.5 - (C) Dave Chapman 2001-2004 Released under the GPL. Latest version available from http://www.linuxstb.org/ Using DVB card "DST DVB-T" tuning DVB-T (in United Kingdom) to 730000000 Hz polling.... Getting frontend event FE_STATUS: polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Event: Frequency: 740600000 SymbolRate: 0 FEC_inner: 3 Bit error rate: 0 Signal strength: 23808 SNR: 20480 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Setting filter for PID 8192 Using 224.0.1.2:5004:2 version=2 Streaming 1 stream ---------------------------------------------------------------------- _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
