Hi Patrick, The driver is asking for dvb-usb-wt220u-zl0353-01.fw. Where shuold I find it? > -----Mensaje original----- > De: Patrick Boettcher [mailto:patrick.boettcher@xxxxxxx] > Enviado el: lunes, 27 de marzo de 2006 20:27 > Para: Mikel Martin > CC: linux-dvb@xxxxxxxxxxx > Asunto: RE: freecom USB dvb-t -- new > vendor/product ID 14aa:022a > > Hi Mikel, > > Please try the attached firmware and patch (along with latest > v4l-dvb hg). > > You don't need to load the zl0353-driver, dvb-usb-dtt200u and > its dependencies is sufficient. > > Please report the result, > > Patrick. > > -- > Mail: patrick.boettcher@xxxxxxx > WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ > > On Mon, 27 Mar 2006, Mikel Martin wrote: > > > Hi Patrick, > > > > Thanks a lot for your interest. I can't do what you ask > yet because I > > don't have the dual boot nor the vmware for linux. > > > > Playing with the dvb-usb-ids.h to force different firmwares to be > > downloaded to the stick. I've found the following: > > > > In windows when I plug the stick it's led blinks for a > while (while > > the Loader is present) and the the led goes on and stops blinking. > > (The Receiver is present now) > > > > In linux if I force to download the dvb-usb-wt220u-01.fw or > > dvb-usb-wt220u-02.fw the sticks's led blinks, but if I force to > > download any other the led doesn't switch on. Perhaps this > information could help. > > > > > > Apart from this, which is the mecanism used to choose which driver > > should be used? If both modules are installed, zl10353.ko and the > > dvb-usb-dtt200u.ko which one would be used? > > > > > > Regards, > > > > Mikel _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
