... So we can add your "LEADTEK - USB2.0 WINFAST DTV DONGLE" dongle to the list of supported devices ;-) The USB subsystem of your computer seems to be broken, badly configured or only partially supported with Linux ... ( Note that in a normal system, the USB-DVB stuff actually works on USB 2.0 ports. ) Regards DO ---------- Initial Header ----------- >From : ygosset <ygosset@xxxxxxx> To : linux-dvb@xxxxxxxxxxx Cc : "Markus Rechberger" <mrechberger@xxxxxxxxx>,"treza@xxxxxxxx" <treza@xxxxxxxx>,"Boettcher, Patrick" <patrick.boettcher@xxxxxxx> Date : Thu, 23 Mar 2006 14:57:57 +0100 Subject : Re: MT2060 and DibCom3000P on USB stick Hello. So, I've installed (compiled) the same version of Dvb Driver on this new host (Usb is based on a KT7A Abit motherboard), and, this is very better: dvbscan works !! But I don't know why at all ! :) Can I have hardware problem on my laptop with usb? (first host) On my laptop, I have 4 usb connectors on, and on one of them, I have already error of type (example with a basic usb mouse) " kernel: usb 2-2: new low speed USB device using uhci_hcd and address 4 kernel: usb 2-2: device not accepting address 4, error -71 kernel: usb 2-2: new low speed USB device using uhci_hcd and address 5 kernel: usb 2-2: device not accepting address 5, error -71 .. " (so, I have banned it everytime: I use only 3 connectors). # ./dvbscan dvb-t/fr-Paris 1>/tmp/dvbscan.txt 2>&1 " # cat /tmp/dvbscan.txt | grep -v "tune" scanning dvb-t/fr-Paris using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 474000000 0 2 9 3 1 0 0 initial transponder 498000000 0 2 9 3 1 0 0 initial transponder 522000000 0 2 9 3 1 0 0 initial transponder 562000000 0 2 9 3 1 0 0 initial transponder 586000000 0 3 9 3 1 2 0 0x0000 0x0201: pmt_pid 0x0000 NTN -- Direct 8 (running) 0x0000 0x0202: pmt_pid 0x0000 NTN -- TMC (running) 0x0000 0x0203: pmt_pid 0x0000 NTN -- BFM TV (running) 0x0000 0x0204: pmt_pid 0x0000 NTN -- i>TELE (running) 0x0000 0x0205: pmt_pid 0x0000 NTN -- Europe 2 TV (running) 0x0000 0x0206: pmt_pid 0x0000 NTN -- Gulli (running) Network Name 'réseau numérique terrestre français' WARNING: >>> tuning failed!!! WARNING: >>> tuning failed!!! WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 0x0000 0x0601: pmt_pid 0x0000 (null) -- TF1 (running) 0x0000 0x0602: pmt_pid 0x0000 (null) -- NRJ12 (running) 0x0000 0x0605: pmt_pid 0x0000 (null) -- TPS STAR (running) 0x0000 0x0604: pmt_pid 0x0000 (null) -- Eurosport France (running, scrambled) 0x0000 0x0603: pmt_pid 0x0000 (null) -- LCI (running, scrambled) WARNING: filter timeout pid 0x0010 0x0000 0x0101: pmt_pid 0x0000 GR1 -- France 2 (running) 0x0000 0x0103: pmt_pid 0x0000 GR1 -- France 4 (running) 0x0000 0x0104: pmt_pid 0x0000 GR1 -- France 5 (running) 0x0000 0x0105: pmt_pid 0x0000 GR1 -- ARTE (running) 0x0000 0x0106: pmt_pid 0x0000 GR1 -- LCP (running) 0x0000 0x0111: pmt_pid 0x0000 Reg -- France 3 (running) 0x0000 0x01ff: pmt_pid 0x0000 ATH -- (null) (running) WARNING: filter timeout pid 0x0010 WARNING: >>> tuning failed!!! WARNING: >>> tuning failed!!! dumping lists (19 services) Done. ... " During the scan, I have empty message in syslog file.. : " kernel: usb 2-2: new full speed USB device using uhci_hcd and address 3 kernel: dvb-usb: found a 'LEADTEK - USB2.0 WINFAST DTV DONGLE' in warm state. kernel: dvb-usb: will use the device's hardware PID filter (table count: 32). kernel: DVB: registering new adapter (LEADTEK - USB2.0 WINFAST DTV DONGLE). kernel: dib3000: Found a DiBcom 3000P. kernel: DVB: registering frontend 0 (DiBcom 3000P/M-C DVB-T)... kernel: MT2060: Identified Microtune MT2060 chip kernel: dvb-usb: schedule remote query interval to 150 msecs. kernel: dvb-usb: LEADTEK - USB2.0 WINFAST DTV DONGLE successfully initialized and connected. hal.hotplug[11741]: DEVPATH is not set kernel: last message repeated 3 times last message repeated 15 times last message repeated 3 times last message repeated 3 times last message repeated 27 times last message repeated 27 times last message repeated 36 times " At soon, Yvan. Le Mercredi 22 Mars 2006 17:49, ygosset a écrit : > Hello. > > I have an another old host with only USB 1.1: > "00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 16) > 00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 16)" > > I will test on to see what's happening. > (idea of Mr Treza :) ) > > Regards, Yvan. > > Le Mercredi 22 Mars 2006 17:39, vous avez écrit : > > Interesting that I have the same problem... > > > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > initial transponder 719000000 0 1 9 3 1 2 0 > > > > >>> tune to: > > >>> 719000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRAN > > >>>SM ISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE > > > > WARNING: filter timeout pid 0x0011 > > WARNING: filter timeout pid 0x0000 > > WARNING: filter timeout pid 0x0010 > > dumping lists (0 services) > > Done. > > > > but I use an experimental v4l-dvb driver for the em2880.. > > > > On 3/22/06, ygosset <ygosset@xxxxxxx> wrote: > > > Hello. > > > > > > I have applied all patch to test MT2060 Tuner on my Usb device from > > > O.Danet (treza@xxxxxxxx), > > > http://www.chez.com/treza/liteon.htm . > > > > > > Here is my trace: > > > " > > > cd /tmp/DVB/v4l-dvb/v4l > > snip.. > > > > Mar 22 12:48:57 kim last message repeated 2 times > > > Mar 22 12:48:58 kim kernel: dvb-usb: could not submit URB no. 0 - get > > > them all back > > > Mar 22 12:50:14 kim kernel: dvb-usb: could not submit URB no. 0 - get > > > them all back > > > Mar 22 12:50:15 kim kernel: > > ... -------------- ALICE HAUT DEBIT : TRIPLE PLAY A 29,95 EUR/MOIS -------------- Découvrez vite ALICEBOX : avec le modem WIFI, profitez de l'ADSL, de la TELEPHONIE et en exclusivité de la TELEVISION ! Bénéficiez aussi de la hotline gratuite 24h/24 ! Soumis à conditions. Pour en profiter cliquez ici http://abonnement.aliceadsl.fr _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
