The USB Videobridge was set up wrong, now it delivers data but looks like either the input frequency isn't completly correct or something else I was already able to identify some dvb-t networks. Think the em2880-dvb/xc3028 extension is on a good way though.. Thankfully people gave me several accounts on their machines for testing .. too bad that I don't have dvb-t around Markus On 3/22/06, Patrick Boettcher <patrick.boettcher@xxxxxxx> wrote: > On Wed, 22 Mar 2006, Markus Rechberger wrote: > > > Interesting that I have the same problem... > > > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > initial transponder 719000000 0 1 9 3 1 2 0 > >>>> tune to: 719000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE > > WARNING: filter timeout pid 0x0011 > > WARNING: filter timeout pid 0x0000 > > WARNING: filter timeout pid 0x0010 > > dumping lists (0 services) > > Done. > > Same symptom, totally different reason. The error just means, that there > is no data input in the demuxer. In your case I rather think there is > something wrong with the demod setup. Output mode? > > Also make sure that you have MPEG-DATA lock (FEC). > > regards, > Patrick. > > -- > Mail: patrick.boettcher@xxxxxxx > WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ > -- Markus Rechberger _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
