On Mon, 2006-03-20 at 15:58 +0100, Marco Coli wrote: > Hello, I own a TT S-1500 Hello ! Did you try to use the drivers built using the latest HG repository ?? This card shall work now... C you ! Perceval. > In /etc/sysconfig/hwconf I have: > class: CAPTURE > bus: PCI > detached: 0 > driver: budget > desc: "1131:7146" > vendorId: 1131 > deviceId: 7146 > subVendorId: 13c2 > subDeviceId: 1003 > pciType: 1 > pcidom: 0 > pcibus: 2 > pcidev: a > pcifn: 0 > > With lspci -v I have: > > 02:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) > Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget / > Hauppauge WinTV-NOVA-S DVB card > Flags: bus master, medium devsel, latency 64, IRQ 9 > Memory at e4800000 (32-bit, non-prefetchable) [size=512] > > So, the card is using the "budget" driver. This is strange, because the > card is a CI one, with module attached, but the module is ignored (I was > expecting the use of budget_ci module). I also have a lot of tuning > problems, but I am not yet sure if the problem is card-related or signal > related. > Is there a way to use the CI module, like on a Nova-S CI (the cards > looks identical)? > > (On a nova-S CI I have those data: > class: CAPTURE > bus: PCI > detached: 0 > driver: budget-ci > desc: "Philips Semiconductors SAA7146" > vendorId: 1131 > deviceId: 7146 > subVendorId: 13c2 > subDeviceId: 100f > pciType: 1 > pcidom: 0 > pcibus: 1 > pcidev: 9 > pcifn: 0 > > > 01:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) > Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget / > Hauppauge WinTV-NOVA-CI DVB card > Flags: bus master, medium devsel, latency 255, IRQ 11 > Memory at e7003000 (32-bit, non-prefetchable) [size=512] > > > ) _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
