Rainer Schubert wrote: > Try "tzap -r station" where "station" is a name from your channels.conf > file. > > Without the "-r" option, there is just tuning, but nothing will be > received (there is no output for you to record). You mean szap (it's a DVB-S Box)? ---------- 8< ---------- 8< ---------- 8< ---------- 8< ---------- server:~ # szap -r Das_Erste reading channels from file '/root/.szap/channels.conf' zapping to 1 'Das_Erste': sat 0, frequency = 11836 MHz H, symbolrate 27500000, vpid = 0x0065, apid = 0x0066 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK ---------- >8 ---------- >8 ---------- >8 ---------- >8 ---------- But when I do a 'cat /dev/dvb/adapter0/dvr0' while running 'szap -r', I don't get any data. I think, it's because signal and snr are zero. Normally they should be >0. :-/ _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
