Hi, I've spent some time getting my "WinTV NOVA-s Plus PCI" running (it was single match @ MediaMarkt joined on the supported budget cards). My surprise is, that it works exactly once! I'm using the current Mercurial "HEAD" and tried plenty of patches I found, but that din't change a thing running on 2.6.14.6. Scanning works, but only on the first boot, but I didn't spend much time into that because my problem is elswhere. I run szap -r ARTE and get a lock: ... status 1f | signal ee00 | snr ffdc | ber 00000000 | unc 00000000 | FE_HAS_LOCK now I run cat /dev/dvb/adapter0/dvr0 > /tmp/working and can play it with mplayer now I call szap -r 'RAI 1' cat /dev/dvb/adapter0/dvr0 > /tmp/broken but there are no bytes written to /tmp/broken and the syslog is filled with: Mar 5 21:11:05 aegir kernel: cx88[0]/2: cx8802_timeout Mar 5 21:11:05 aegir kernel: cx88[0]/2: cx8802_stop_dma Mar 5 21:11:05 aegir kernel: cx88[0]/2: restarting queue Mar 5 21:11:05 aegir kernel: cx88[0]/2: queue is empty - first active Mar 5 21:11:05 aegir kernel: cx88[0]/2: cx8802_start_dma w: 0, h: 0, f: 2 Mar 5 21:11:05 aegir kernel: cx88[0]/2: setting the interrupt mask Mar 5 21:11:05 aegir kernel: cx88[0]/2: [f2ab5e40/0] cx8802_buf_queue - first active Mar 5 21:11:05 aegir kernel: cx88[0]/2: cx8802_timeout ... Sometimes reloading of all modules helps, but garanteed only a reboot makes it streaming again. any idea? Thanks Leif _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
