Hi I bought a Sansun Sky Dream usb DVB-T box from eBay. Under Windows it works, I can watch FTA channels. Under Linux (Fedora 4, recent kernel 2.6.15-1.1833_FC4, x86_64) tuning fails. When I plug in the box dmesg shows the following: usb 3-2: new full speed USB device using ohci_hcd and address 2 dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dibusb-5.0.0.11.fw' to the 'Cypress AN2135' dvb-usb: TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and connected. usbcore: registered new driver dvb_usb_dibusb_mb lsmod shows this: dvb_usb_dibusb_mb 18241 0 dvb_usb_dibusb_common 10053 1 dvb_usb_dibusb_mb dib3000mc 17345 1 dvb_usb_dibusb_common dvb_usb 22473 2 dvb_usb_dibusb_mb,dvb_usb_dibusb_common dvb_core 95997 1 dvb_usb dvb_pll 12869 3 dvb_usb_dibusb_mb,dvb_usb_dibusb_common,dvb_usb dib3000mb 14145 1 dvb_usb_dibusb_mb dib3000_common 3393 2 dib3000mc,dib3000mb With dvbt-scanaid-0.03 I created the following file (I'm in Hungary and we have a pilot service): [root@cerka dvbt-scanaid-0.03]# cat Scanlist.txt # Scanning list was created by Create_Scanning_Table by Johannes Bauer T 650000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE T 714000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE When I try to scan I receive the following: [root@cerka dvbt-scanaid-0.03]# scandvb Scanlist.txt > channels.conf scanning Scanlist.txt using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 650000000 0 2 0 3 1 2 0 initial transponder 714000000 0 2 0 3 1 2 0 >>> tune to: 650000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 650000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 714000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 714000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. Can anybody help me ? Thanks Gabor Dolla Budapest, Hungary _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
