On Wednesday 22 February 2006 17:54, Uwe Bugla wrote: > Hi Sigmund, Hi Ernst, > Please send in a printout of dmesg >dmesg.txt and comment with what kind of > card you had success with my patch collection. Not to me but publically to > the linuxdvb mailing list please. Hm. I don't like the name 'patch collection'. If i apply that stuff __my__ card works. Thanks for that, good work. > This is very important as a proof for higher decision processes, and in so > far more worthier than just a small "Thank you". What is a "higher decision processes"? Anyway: Linux version 2.6.16-rc4 (root@oernie) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 PREEMPT Mon Feb 20 22:07:34 CET 2006 [....] Linux video capture interface: v1.00 saa7146: register extension 'dvb'. ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 17 saa7146: found saa7146 @ mem f1024000 (revision 1, irq 17) (0x13c2,0x0003). DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X). adapter has MAC addr = 00:d0:5c:23:85:9b dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622 dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: Crystal audio DAC @ card 0 detected saa7146_vv: saa7146 (0): registered device video0 [v4l2] saa7146_vv: saa7146 (0): registered device vbi0 [v4l2] DVB: registering frontend 0 (ST STV0299 DVB-S)... input: DVB on-card IR receiver as /class/input/input2 dvb-ttpci: found av7110-0. bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20 bttv0: Bt878 (rev 17) at 0000:02:0c.0, irq: 20, latency: 64, mmio: 0xf7efe000 bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c bttv0: using: Pinnacle PCTV Sat [card=94,autodetected] bttv0: gpio: en=00000000, out=00000000 in=009f00fc [init] bttv0: using tuner=-1 bttv0: registered device video1 bttv0: registered device vbi1 bttv0: PLL: 28636363 => 35468950 .. ok bttv0: add subdevice "dvb0" bt878: DVB driver version 0.0.1 loaded bt878: DVB interface found (0). ACPI: PCI Interrupt 0000:02:0c.1[A] -> GSI 20 (level, low) -> IRQ 20 bt878_probe: card id=[0x1c11bd],[ Pinnacle PCTV Sat ] has DVB functions. bt878(0): Bt878 (rev 17) at 02:0c.1, irq: 20, latency: 64, memory: 0xf7eff000 DVB: registering new adapter (bttv0). DVB: registering frontend 1 (Conexant CX24110 DVB-S)... [....] oernie:~ # uptime 07:01:18 up 5 days, 8:48, 5 users, load average: 0.10, 0.07, 0.03 No restart of any dvb-subsytem was necessary. Still works. ASUS P4800-E deluxe 2*80GB ATA RAID 0/1 4*250GB SATA RAID5 [and many more features:-)] <earny/> _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
