Perceval Anichini wrote: > Attached 2 patches : > > ttpci-lnbp21-set-voltage-fixed-masks sets more precisely the > masks for the function lnbp21_set_voltage () function. This is > an almost cosmetic patch. Bit 2 is set anyway, bits 0 and 1 are read-only. Your patch would not change anything... I suggest to delay that until the LNBP21 code is factored out into a separate file. Currently there are at least 3 lnbp21 implementations in the driver tree. > ttpci-tt-budget-1500s-fix fixed a S1500 issue : When set in > vertical mode, the card loose the signal sync. The fix is to > set the card in "high voltage mode". This has been confirmed > from TechnoTrend. (Many thanks for their help) Nak. You must not enable high voltage by default. Maybe it would be useful to add a module parameter 'high_lnb_voltage' to dvb_frontend.c. This way cable length compensation could be enabled if the application software does not support the ioctl. Oliver -- -------------------------------------------------------- VDR Remote Plugin available at http://www.escape-edv.de/endriss/vdr/ -------------------------------------------------------- _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
