Hi, I've got the new TT-Budget S1500 card with the additional CI card. The budget card itself works fine with the latest marcial checkout, kernel 2.6.15 and VDR 1.3.42, but the CI doesn't get recognized :( | vdrclient # lspci -v | 02:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) | Subsystem: Technotrend Systemtechnik GmbH Unknown device 1017 | Flags: bus master, medium devsel, latency 66, IRQ 18 | Memory at 40200000 (32-bit, non-prefetchable) [size=512] | vdrclient # lspci -v | 02:09.0 0480: 1131:7146 (rev 01) | Subsystem: 13c2:1017 | Flags: bus master, medium devsel, latency 66, IRQ 18 | Memory at 40200000 (32-bit, non-prefetchable) [size=512] And I get the following messages when loading the modules: | Feb 13 01:24:26 vdrclient kernel: saa7146: register extension 'budget dvb'. | Feb 13 01:24:27 vdrclient kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 18 | Feb 13 01:24:27 vdrclient kernel: saa7146: found saa7146 @ mem c893a000 (revision 1, irq 18) (0x13c2,0x1017). | Feb 13 01:24:27 vdrclient kernel: DVB: registering new adapter (TT-Budget/WinTV-NOVA-S PCI (rev AL/alps bsbe1 lnbp21 frontend)). | Feb 13 01:24:27 vdrclient kernel: adapter has MAC addr = XXXXXXXXXX | Feb 13 01:24:27 vdrclient kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)... Why does the budget module detect the card and not budget-ci? Is it not the same card type like the TT C1500 or T1500? Thanks for help! Vsevolod Kukol _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
