Hi (especialy Manu)! I have a Twinhan DTV MiniCab DVB-C card (VP2021). This card has no CI module! As I know from the archives people had problems with similar kinds of cards. My problem is that if I tune a channel i get lots of artifacts in the picture (but you can still recognize things) and nearly unrecogizable audio. Please tell me how to fix this or what further info you need. I'm currently using kernel 2.6.15.3 and it's dvb modules: dvb_bt8xx 11140 0 nxt6000 6276 1 dvb_bt8xx mt352 5508 1 dvb_bt8xx dvb_pll 8964 1 dvb_bt8xx sp887x 6532 1 dvb_bt8xx dst_ca 10624 1 dvb_bt8xx dvb_core 66984 2 dvb_bt8xx,dst_ca cx24110 6532 1 dvb_bt8xx or51211 8324 1 dvb_bt8xx lgdt330x 6940 1 dvb_bt8xx dst 18948 2 dvb_bt8xx,dst_ca bt878 7768 2 dvb_bt8xx,dst tuner 35364 0 bttv 147152 2 dvb_bt8xx,bt878 video_buf 15748 1 bttv btcx_risc 3848 1 bttv tveeprom 12560 1 bttv videodev 7296 1 bttv v4l2_common 4864 1 bttv If I use modprobe dst verbose=5 this is the dmesg result: DVB: registering new adapter (bttv0). rdc_8820_reset: Resetting DST dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 06 00 00 00 00 00 fa ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 1 read_dst: reply is 0x0 0x44 0x43 0x54 0x2d 0x43 0x49 0x6c dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_get_device_id: Recognise [DCT-CI] dst_type_print: DST type: cable DST type flags : 0x1 newtuner 0x2 ts204 0x8 firmware version = 1 0x10 firmware version = 2 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 0a 00 00 00 00 00 f6 ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait NOT ready after 200 dst_get_mac: Unsupported Command dst_probe: MAC: Unsupported command dst_ca_attach: registering DST-CA device DVB: registering frontend 0 (DST DVB-C)... Greets, Jonek. _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
