[linux-dvb] Multiple vp7045 DVB USB devices and lockups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Does anyone successfully have multiple vp7045 dvb-t usb devices working? 
(Twinhan Alpha II, Digitalnow TwinDVB-T, multiple Tinyusb2 devices etc)

I also have the same problem as has been posted about over the last few 
months (see quoted below from Tim Davies), with dual vp7045 usb devices 
(DigitalNow TwinDVB-T device - rebadged DVICO Tinyusb 2 devices).

This post is mostly configuration info - along with Tim's debug output 
quoted below.

Currently using Fedora Core 4's 2.6.14-1.1656_FC4 kernel, all updates 
applies, and the latest cvs build of the v4l/dvb modules, along with the 
dvb-usb-vp7045-01.fw firmware.  I've also had the same problem with the 
default 2.6.14 kernel modules, and also the Jan 16th build of 2.6.16-RC1 
kernel (yes, I've done a lot of compiling in the last week ;)

Both devices work fine (tested on the same hardware with Windows XP) at 
the same time, so its not a usb power-rail problem.

If anyone can help shed some light on a solution, I'd be grateful - done 
a lot of reading and found a lot of people with the same issue, but no 
resolution yet.

I'm happy to test any potential solutions - or enable debug in my 
current module builds to provide more specific info than is included 
below. :)

Thanks,

Hilton.

My dmesg output is:

[mythtv@tv ~]$ dmesg | grep dvb
dvb-usb: found a 'Twinhan USB2.0 DVB-T receiver (TwinhanDTV 
Alpha/MagicBox II)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software 
demuxer.
dvb-usb: MAC address: 08:ca:17:4e:bc:ff
dvb-usb: schedule remote query interval to 400 msecs.
dvb-usb: Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II) 
successfully initialized and connected.
dvb-usb: found a 'Twinhan USB2.0 DVB-T receiver (TwinhanDTV 
Alpha/MagicBox II)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software 
demuxer.
dvb-usb: MAC address: 08:ca:17:4e:b8:ff
dvb-usb: schedule remote query interval to 400 msecs.
dvb-usb: Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II) 
successfully initialized and connected.
usbcore: registered new driver dvb_usb_vp7045

My /dev/dvb is:

[mythtv@tv ~]$ ls -laR /dev/dvb
/dev/dvb:
total 0
drwxr-xr-x   4 root   root     80 Jan 21  2006 .
drwxr-xr-x  12 root   root   4480 Jan 21 12:04 ..
drwxr-xr-x   2 mythtv mythtv  120 Jan 21  2006 adapter0
drwxr-xr-x   2 mythtv mythtv  120 Jan 21  2006 adapter1

/dev/dvb/adapter0:
total 0
drwxr-xr-x  2 mythtv mythtv    120 Jan 21  2006 .
drwxr-xr-x  4 root   root       80 Jan 21  2006 ..
crw-rw----  1 mythtv mythtv 212, 4 Jan 21  2006 demux0
crw-rw----  1 mythtv mythtv 212, 5 Jan 21  2006 dvr0
crw-rw----  1 mythtv mythtv 212, 3 Jan 21  2006 frontend0
crw-rw----  1 mythtv mythtv 212, 7 Jan 21  2006 net0

/dev/dvb/adapter1:
total 0
drwxr-xr-x  2 mythtv mythtv     120 Jan 21  2006 .
drwxr-xr-x  4 root   root        80 Jan 21  2006 ..
crw-rw----  1 mythtv mythtv 212, 68 Jan 21  2006 demux0
crw-rw----  1 mythtv mythtv 212, 69 Jan 21  2006 dvr0
crw-rw----  1 mythtv mythtv 212, 67 Jan 21  2006 frontend0
crw-rw----  1 mythtv mythtv 212, 71 Jan 21  2006 net0

Performing a scan works fine for adapter0

[mythtv@tv ~]$ scandvb files/frequency.artarmon
scanning files/frequency.artarmon
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 226500000 1 2 0 3 1 2 0
initial transponder 191625000 1 2 0 3 1 2 0
initial transponder 571500000 1 2 0 3 1 2 0
initial transponder 219500000 1 3 0 3 1 1 0
initial transponder 177500000 1 2 0 3 1 2 0
 >>> tune to: 
226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE

But with adapter1 (scandvb -a 1 )  I get the "using 
'/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter0/demux0', then the 
PC hard-locks about 15s later with not output.

And finally, Tim's quoted debug for the same issue.



>Hi,
>
>I noticed in November there was a problem running multiple Twinhan DTV 
>MagicBox II devices, which causes the kernel to lock up.  As far as I 
>could tell, the issue was abandoned - with a copy of the kernel oops 
>being needed to continue...
>
>Well, I also have multiple vp7045 based tuners (the DNTV version) and 
>have the same problem.  I have an excerpt of the kernel oops text below.
>
>Basically the problem seems to occur if any tuner apart from the first 
>one is opened, and there is normally a delay (15-20sec?) before the 
>crash.  I am using the CVS driver from the 16/1/06 (the most recent).
>
>Thanks,
>
>Tim.
>
>
>Jan 16 10:39:20 mediabox <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65} <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65}
>
>... <repeated ~100 times>
>
>Jan 16 10:39:20 mediabox <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65} <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65}
>Jan 16 10:39:20 mediabox <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65} <ffffffff8012cde4>{deactivate_task+20}
>Jan 16 10:39:20 mediabox <ffffffff885f7f5b>{:dvb_core:dvb_frontend_thread+219}
>Jan 16 10:39:20 mediabox <ffffffff80130031>{copy_process+4241} <ffffffff8010f31e>{child_rip+8}
>Jan 16 10:39:20 mediabox <ffffffff885f7e80>{:dvb_core:dvb_frontend_thread+0}
>Jan 16 10:39:20 mediabox <ffffffff8010f316>{child_rip+0}
>Jan 16 10:39:20 mediabox scheduling while atomic: kdvb-fe-1/0xffff8100/14284
>Jan 16 10:39:20 mediabox
>Jan 16 10:39:20 mediabox Call Trace:<ffffffff803ca99a>{schedule+122} <ffffffff8032dbd0>{timeout_kill+0}
>Jan 16 10:39:20 mediabox <ffffffff803cb7b4>{schedule_timeout+148} <ffffffff80139670>{process_timeout+0}
>Jan 16 10:39:20 mediabox <ffffffff80139a4a>{msleep+42} <ffffffff8860c11c>{:dvb_usb_vp7045:vp7045_usb_op+284}
>Jan 16 10:39:20 mediabox <ffffffff8860c3fa>{:dvb_usb_vp7045:.text.lock.vp7045+5}
>Jan 16 10:39:20 mediabox <ffffffff8860c24a>{:dvb_usb_vp7045:vp7045_power_ctrl+42}
>Jan 16 10:39:20 mediabox <ffffffff8860784c>{:dvb_usb:dvb_usb_fe_wakeup+44} <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65}
>Jan 16 10:39:20 mediabox <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65} <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65}
>
>...
>
>Jan 16 10:39:20 mediabox <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65} <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65}
>Jan 16 10:39:20 mediabox <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65} <ffffffff8012cde4>{deactivate_task+20}
>Jan 16 10:39:20 mediabox <ffffffff885f7f5b>{:dvb_core:dvb_frontend_thread+219}
>Jan 16 10:39:20 mediabox <ffffffff80130031>{copy_process+4241} <ffffffff8010f31e>{child_rip+8}
>Jan 16 10:39:20 mediabox <ffffffff885f7e80>{:dvb_core:dvb_frontend_thread+0}
>Jan 16 10:39:20 mediabox <ffffffff8010f316>{child_rip+0}
>Jan 16 10:39:20 mediabox scheduling while atomic: kdvb-fe-1/0xffff8100/14284
>Jan 16 10:39:20 mediabox
>Jan 16 10:39:20 mediabox Call Trace:<ffffffff803ca99a>{schedule+122} <ffffffff803cb7b4>{schedule_timeout+148}
>Jan 16 10:39:20 mediabox <ffffffff80139670>{process_timeout+0} <ffffffff80139a4a>{msleep+42}
>Jan 16 10:39:20 mediabox <ffffffff8860c11c>{:dvb_usb_vp7045:vp7045_usb_op+284}
>Jan 16 10:39:20 mediabox <ffffffff8860c3fa>{:dvb_usb_vp7045:.text.lock.vp7045+5}
>Jan 16 10:39:20 mediabox <ffffffff8860c24a>{:dvb_usb_vp7045:vp7045_power_ctrl+42}
>Jan 16 10:39:20 mediabox 861>{:dvb_usb:dvb_usb_fe_wakeup+65} <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65}
>Jan 16 10:39:20 mediabox <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65} <ffffffff88607861>{:dvb_usb:dvb_usb_fe_wakeup+65}
>
>...
>



[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux