I have a pair of nova-t cards in a linux box. I can record from either fine, and split the channels, but if I try and record both at once, the second card always fails, I think because the second is trying to broadcast on the same address, but the man page i have for dvbstream is way out of date. Even if I add options for -i and -r, I still always get server:bind: Address already in use for the second card. What am I doing wrong? stef root@stefdesk:/media/usbdisk/dvb# dvbstream -c0 -f 48200 -o:3.mpg 2827 2828 -o:4.mpg 2870 2871 & dvbstream v0.5 - (C) Dave Chapman 2001-2004 Released under the GPL. Latest version available from http://www.linuxstb.org/ Open file 3.mpg Open file 4.mpg MAP 0, file 3.mpg: From -1 secs, To -1 secs, 0 PIDs - 2827 2828 MAP 1, file 4.mpg: From -1 secs, To -1 secs, 0 PIDs - 2870 2871 Setting filter for PID 2827 [1] 29542 root@stefdesk:/media/usbdisk/dvb# Setting filter for PID 2828 Setting filter for PID 2870 Setting filter for PID 2871 Using 224.0.1.2:5004:2 version=2 Streaming 4 streams root@stefdesk:/media/usbdisk/dvb# dvbstream -c1 -f 506000 -o:1.mpg 600 601 -o:2.mpg 610 611 dvbstream v0.5 - (C) Dave Chapman 2001-2004 Released under the GPL. Latest version available from http://www.linuxstb.org/ Open file 1.mpg Open file 2.mpg Using DVB card "Hauppauge Nova-T DVB-T" tuning DVB-T (in United Kingdom) to 506000000 Hz polling.... Getting frontend event FE_STATUS: polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Bit error rate: 16383 Signal strength: 55 SNR: 65535 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC MAP 0, file 1.mpg: From -1 secs, To -1 secs, 0 PIDs - 600 601 MAP 1, file 2.mpg: From -1 secs, To -1 secs, 0 PIDs - 610 611 Setting filter for PID 600 Setting filter for PID 601 Setting filter for PID 610 Setting filter for PID 611 Using 224.0.1.2:5004:2 version=2 Streaming 4 streams server: bind: Address already in use
