El Domingo, 15 de Enero de 2006 16:42, Ole Reinartz escribi?:
> Hartmut Hackmann schrieb:
> > Ok, you need to do the following:
> >
> > analog section:
> > - add a card ID macro to saa7134.h
> > Please take care that the macro name is descriptive.
> > - add an entry at the end of the saa7134_boards array in saa7134-cards.c
> > most entries are pretty self descriptive.
> > - you get the tuner type from tuner.h
> > - audio_clock reflects the crystal for the saa7134 on the board. ( the
> > small metal component.
> > use 0x00200000 for a 24.576 MHz crystal and 0x00187de7 for 32.11 MHz
> > - for the TD1316 tuner, you will need the TDA9887_PRESENT flag.
> > - you need an inputs entry for each input of the card.
> > .vmux values are valid from 0 to 3, add 8 for s-video
> > .amux can be LINE1, LINE2 or TV
> > you can find the values by try and error.
> > - add an entry in the saa7134_pci_tbl in saa7134-cards.c. You should
> > insert
> > it right before the entries for cards without eeprom. You need to enter
> > the .subvendor and .subdevice entries that are reported by lspci for
> > your
> > card.
> > You might need to add code in this file for remote control and
> > initialization
> > to analog mode. We don't know yet, but you might have a look at the
> > SAA7134_BOARD_PHILIPS_EUROPA label in saa7134_board_init2(). You might
> > need
> > something similar.
> > Now your card is autodetected and analog should work. Test!
>
> Hi,
> just got that part running. At least one of the composite inputs works.
> Don't know about sound, though.
> To get on with the mt352 I need its i2c- bus and -address. I expect it
> at the bus of the saa7134 (bus 0 in my case) and at the address 0x0f.
> Jose, you once posted an i2c dump of a working setup of the mt352 on
> this list. What address did you use?
>
> Regards,
> Ole
The adress was 0xf. (I forgot to cc to the list)
With this definition composite svideo and audio works.
[SAA7134_BOARD_AVERMEDIA_777] = {
.name = "AverTV DVB-T 777",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TD1316,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_comp1,
.vmux = 0,
.amux = LINE1,
},{
.name = name_svideo,
.vmux = 8,
.amux = LINE1,
}},
},
Jose Alberto
