On 1/8/06, Michael Krufky <mkrufky@xxxxxxx> wrote: > Paul Wheeler wrote: > > >I have just installed a nova-t pci card alongside my avermedia 771. > >The avermedia works fine with out any problem. However on a new > >install of 2.6.15 on gentoo i cant seem to detect the adapter for the > >nova-t below is dmesg and dev results. Has naybody else been able to > >get it working with 2.6.15? Am I missing a kernel option?? It seems > >dmesg is finding adapter0 but I cannot find the adapter0 in /dev I am > >also using udev v79. > > > >dmesg: > > > > > >Linux video capture interface: v1.00 > >bttv: driver version 0.9.16 loaded > >bttv: using 8 buffers with 2080k (520 pages) each for capture > >bttv: Bt8xx card found (0). > >ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 16 > >bttv0: Bt878 (rev 17) at 0000:02:0a.0, irq: 16, latency: 64, mmio: 0xe7bfe000 > >bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem > >ID is 1461:0771 > >bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected] > >bttv0: gpio: en=00000000, out=00000000 in=00dfffdf [init] > >bttv0: using tuner=4 > >bttv0: registered device video0 > >bttv0: registered device vbi0 > >bttv0: PLL: 28636363 => 35468950 .. ok > >bttv0: add subdevice "remote0" > >bttv0: add subdevice "dvb0" > >input: i2c IR (Hauppauge) as /class/input/input1 > >input: bttv IR (card=123) as /class/input/input2 > >cx2388x v4l2 driver version 0.0.5 loaded > >ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 17 > >CORE cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T > >[card=18,autodetected] > >TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe > >tveeprom 1-0050: Hauppauge model 90002, rev C176, serial# 188320 > >tveeprom 1-0050: MAC address is 00-0D-FE-02-DF-A0 > >tveeprom 1-0050: tuner model is Thompson DTT7592 (idx 76, type 4) > >tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80) > >tveeprom 1-0050: audio processor is None (idx 0) > >tveeprom 1-0050: decoder processor is CX882 (idx 25) > >tveeprom 1-0050: has no radio, has IR remote > >cx88[0]: hauppauge eeprom: model=90002 > >input: cx88 IR (Hauppauge Nova-T DVB-T as /class/input/input3 > >cx88[0]/0: found at 0000:02:0c.0, rev: 5, irq: 17, latency: 64, mmio: 0xec000000 > >cx88[0]/0: registered device video1 [v4l2] > >cx88[0]/0: registered device vbi1 > >cx2388x blackbird driver version 0.0.5 loaded > >cx2388x dvb driver version 0.0.5 loaded > >ACPI: PCI Interrupt 0000:02:0c.2[A] -> GSI 20 (level, low) -> IRQ 17 > >cx88[0]/2: found at 0000:02:0c.2, rev: 5, irq: 17, latency: 64, mmio: 0xed000000 > >cx88[0]/2: cx2388x based dvb card > >DVB: registering new adapter (cx88[0]). > >DVB: registering frontend 0 (Conexant CX22702 DVB-T)... > >bt878: AUDIO driver version 0.0.0 loaded > >bt878: Bt878 AUDIO function found (0). > >ACPI: PCI Interrupt 0000:02:0a.1[A] -> GSI 22 (level, low) -> IRQ 16 > >bt878(0): Bt878 (rev 17) at 02:0a.1, irq: 16, latency: 64, memory: 0xe7bff000 > >DVB: registering new adapter (bttv0). > >DVB: registering frontend 1 (Zarlink MT352 DVB-T)... > > > >/dev/dvb: > >drwxr-xr-x 2 root root 120 Jan 8 17:49 adapter1 > > > >/dev/v4l: > >crw-rw---- 1 root video 81, 224 Jan 8 17:49 vbi0 > >crw-rw---- 1 root video 81, 225 Jan 8 17:49 vbi1 > >crw-rw---- 1 root video 81, 0 Jan 8 17:49 video0 > >crw-rw---- 1 root video 81, 1 Jan 8 17:49 video1 > > > > > >Cheers > >Paul > > > >_______________________________________________ > > > >linux-dvb@xxxxxxxxxxx > >http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > > modprobe cx88-dvb > All the options are compiled in and are not modules. (there is no cx88-dvb module to be able to modprobe) Paul
