On 5 Jan 2006 at 23:00, Manu Abraham wrote: > Hello Benedict, > > Benedict White wrote: > > >>You should see: > >> > >>corbin3:~# ll /dev/dvb/adapter1/ > >>total 0 > >>drwxr-xr-x 2 root root 120 Jan 2 19:06 . > >>drwxr-xr-x 4 root root 80 Jan 2 19:06 .. > >>crw-rw---- 1 root video 212, 68 Jan 2 19:06 demux0 > >>crw-rw---- 1 root video 212, 69 Jan 2 19:06 dvr0 > >>crw-rw---- 1 root video 212, 67 Jan 2 19:06 frontend0 > >>crw-rw---- 1 root video 212, 71 Jan 2 19:06 net0 > >> > >> > >> > > > >Cool. I think I am only missing the front end. > > > > > > > > The changes were a bit experimental in the sense that we planned to add > h/w tuning support too, hence i did not commit to linuxtv.org CVS. > I think if you need a fix before things are back to normal, probably > Mark can help you out in the meantime for the updated tree. > Many thanks. Unfortunately the problem remains. I get this from kernel.log: Jan 6 15:29:39 freevo bttv: driver version 0.9.16 loaded Jan 6 15:29:39 freevo bttv: using 8 buffers with 2080k (520 pages) each for capture Jan 6 15:29:39 freevo bttv: Bt8xx card found (0). Jan 6 15:29:39 freevo ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 Jan 6 15:29:39 freevo PCI: setting IRQ 11 as level-triggered Jan 6 15:29:39 freevo ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Jan 6 15:29:39 freevo bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 11, latency: 64, mmio: 0xdddfe000 Jan 6 15:29:39 freevo bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001 Jan 6 15:29:39 freevo bttv0: using: Twinhan DST + clones [card=113,autodetected] Jan 6 15:29:39 freevo bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] Jan 6 15:29:39 freevo bttv0: using tuner=4 Jan 6 15:29:39 freevo bttv0: add subdevice "dvb0" Jan 6 15:29:39 freevo bt878: AUDIO driver version 0.0.0 loaded Jan 6 15:29:39 freevo bt878: Bt878 AUDIO function found (0). Jan 6 15:29:39 freevo ACPI: PCI Interrupt 0000:00:0c.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Jan 6 15:29:39 freevo bt878(0): Bt878 (rev 17) at 00:0c.1, irq: 11, latency: 64, memory: 0xdddff000 Jan 6 15:29:39 freevo DVB: registering new adapter (bttv0). Jan 6 15:29:39 freevo dst_probe: unknown device. Jan 6 15:29:39 freevo frontend_init: Could not find a Twinhan DST. Jan 6 15:29:39 freevo dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem 1822/0001 An ls of /dev/dvb/adapter0/ gives: [root@freevo ~]# ls -l /dev/dvb/adapter0/ total 0 crw-rw---- 1 root video 212, 4 2006-01-06 15:29 demux0 crw-rw---- 1 root video 212, 5 2006-01-06 15:29 dvr0 crw-rw---- 1 root video 212, 7 2006-01-06 15:29 net0 So still no frontend driver. Umm... My modprobe line looks like this: dst dst_algo=0 Is there anything else I should be doing? Kind regards Benedict White
