strider400@xxxxxxxxxxxxxxx wrote: >Hi > >Are you guys talking about the "DViCO FusionHDTV USB - DVB-T" box? If so can I use the cvs patch to upgrade my kernel? As I have had trouble in the past downloading the cvs source and compiling. > Ben- Actually, this patch (already applied to cvs) adds support for the ATSC version of the FusionHDTV USB box. However, if you tell me some information about your USB box, I can prepare a patch for you to test. Please email the output of 'lsusb', with your FusionHDTV USB box connected. If you can open it up, and read to me the names on the chips, that would be helpful as well, although I might be able to tell this based on the usb id that you give me from your lsusb output. A high-res photo of the board would be even better, but not required. This is what I'm looking for: 0fe9:d500 - ATSC (LG-H064F) 0fe9:dB00 - DVBT (MT352 + LG-Z201) 0fe9:db10 - DVBT (MT352 + Thomson7579) 0fe9:db50 - DVBT_DUAL (MT352 + Dnos104z) 0fe9:db54 - DVBT_DUAL (MT352 + Dnos104z) In order for this stuff to work, you will have to install the modules from v4l-dvb cvs. I understand that you have had trouble in the past, why dont you try the directions in the wiki-howto: http://linuxtv.org/v4lwiki/index.php/How_to_build_from_CVS The same firmware file for use with the ATSC box will also work on your DVB-T box. I'll give you more info about that after my patch is ready for you to test... but I'll need the info from you above first. Thanks, Michael
