Hi folks, so here some more debug information: using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 198500000 1 3 9 1 1 3 0 >>> tune to: 198500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 WARNING: >>> tuning failed!!! >>> tune to: 198500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed) >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. Under Windows everything works fine (with firmware 5.5.21.0 from dnt). No errors in the log file. So I'm wondering why there should be any problem with the stick itself. Regards, Alain > Hello, > > I just plugged in the stick in my freshly installed SuSE 10 > installation and it runs very well but only if you are tuning UHF > channels. > > With VHF I never get a lock, even when manually inserting all > transmission parameters. Searching the frequency gives me fine signal > strength and SNR but no lock either. > > Any known issues with this module? Kernel ist stock 2.6.13 from SuSE. > > Thanks, > > Alain > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > >
