Hi! I recently bought a 'dnt Euro Stick' DVB-T USB device. To use it with my Debian sarge box (currently kernel 2.6.14-2). It should be like a WideView/Yakumo/Hama/Typhoon/Yuan Box supported by the kernel -- at least according to this list: http://www.linuxtv.org/wiki/index.php/DVB_USB I downloaded a firmware file (dvb-usb-dtt200u-01.fw) from here: http://www.linuxtv.org/downloads/firmware/ and put it in /usr/lib/hotplug/firmware and renamed it to 'dvb-usb-wt220u-01.fw' (because the driver was looking for that filename). When I plug the device it seems that the firmware is loaded properly (see output below). But there is one strange message: dvb-usb: recv bulk message failed: -110 And now for the problem. When I tried to scan for channels I get this error message: xxx@xxxx:~$ scan de-Leipzig scanning de-Leipzig using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' main:1885: FATAL: FE_GET_INFO failed: 22 Invalid argument This is the list of the (relevant) loaded modules: Module Size Used by dvb_usb_dtt200u 12292 0 dvb_usb 20616 1 dvb_usb_dtt200u dvb_pll 10884 1 dvb_usb dvb_ttusb_budget 32356 0 dvb_core 88060 2 dvb_usb,dvb_ttusb_budget tda1004x 16260 1 dvb_ttusb_budget firmware_class 11840 3 dvb_usb,dvb_ttusb_budget,tda1004x ves1820 6788 1 dvb_ttusb_budget stv0299 12552 1 dvb_ttusb_budget tda8083 6724 1 dvb_ttusb_budget cx22700 6788 1 dvb_ttusb_budget i2c_core 24792 11 dvb_usb,i2c_viapro,mt352,dvb_ttusb_budget,tda1004x,ves1820,stv0299,tda8083,cx22700,radeonfb,i2c_algo_bit Could anybody please give me a pointer where the problem is. The last few days spending my time with Google were not really successful. Those few people that I found that had this Problem (with various devices and kernel versions) all surrendered. Thanks in advance. Michael -- syslog output --- Dec 9 20:39:36 localhost kernel: usb 5-6: new high speed USB device using ehci_hcd and address 2 Dec 9 20:39:38 localhost kernel: dvb-usb: found a 'WideView WT-220U PenType Receiver (Typhoon/Freecom)' in cold state, will try to load a firmware Dec 9 20:39:38 localhost kernel: dvb-usb: downloading firmware from file 'dvb-usb-wt220u-01.fw' to the 'Cypress FX2' Dec 9 20:39:38 localhost kernel: dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully initialized and connected. Dec 9 20:39:38 localhost kernel: usbcore: registered new driver dvb_usb_dtt200u Dec 9 20:39:38 localhost usb.agent[5038]: dvb-usb-dtt200u: loaded successfully Dec 9 20:39:38 localhost udev[5136]: creating device node '/dev/usbdev5.2' Dec 9 20:39:39 localhost kernel: usb 5-6: USB disconnect, address 2 Dec 9 20:39:39 localhost kernel: dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. Dec 9 20:39:40 localhost kernel: usb 5-6: new high speed USB device using ehci_hcd and address 3 Dec 9 20:39:41 localhost kernel: dvb-usb: found a 'WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)' in warm state. Dec 9 20:39:41 localhost kernel: dvb-usb: will use the device's hardware PID filter (table count: 15). Dec 9 20:39:41 localhost kernel: DVB: registering new adapter (WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)). Dec 9 20:39:41 localhost kernel: DVB: registering frontend 0 (WideView USB DVB-T)... Dec 9 20:39:41 localhost kernel: dvb-usb: schedule remote query interval to 300 msecs. Dec 9 20:39:41 localhost kernel: dvb-usb: WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U) successfully initialized and connected. Dec 9 20:39:43 localhost kernel: dvb-usb: recv bulk message failed: -110 Dec 9 20:39:49 localhost udev[5163]: removing device node '/dev/usbdev5.2' Dec 9 20:39:49 localhost udev[5175]: configured rule in '/etc/udev/rules.d/udev.rules[67]' applied, 'event3' becomes 'input/%k' Dec 9 20:39:49 localhost udev[5175]: creating device node '/dev/input/event3' Dec 9 20:39:49 localhost udev[5165]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.dvr0' becomes '%c' Dec 9 20:39:49 localhost udev[5165]: creating device node '/dev/dvb/adapter0/dvr0' Dec 9 20:39:49 localhost udev[5174]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.frontend0' becomes '%c' Dec 9 20:39:49 localhost udev[5174]: creating device node '/dev/dvb/adapter0/frontend0' Dec 9 20:39:49 localhost udev[5164]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.demux0' becomes '%c' Dec 9 20:39:49 localhost udev[5164]: creating device node '/dev/dvb/adapter0/demux0' Dec 9 20:39:49 localhost udev[5166]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.net0' becomes '%c' Dec 9 20:39:49 localhost udev[5166]: creating device node '/dev/dvb/adapter0/net0' Dec 9 20:39:49 localhost usb.agent[5248]: dvb-usb-dtt200u: already loaded Dec 9 20:39:49 localhost udev[5302]: creating device node '/dev/usbdev5.3' -- GPG key: 1024D/3144BE0F Michael Hanke http://apsy.gse.uni-magdeburg.de/hanke ICQ: 48230050 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: Digital signature Url : http://www.linuxtv.org/pipermail/linux-dvb/attachments/20051210/ab4bbe4e/attachment.pgp
