Stefan Hu?feldt wrote: >Hello, > >when i try the latest CVS driver with my AverMedia 771 i got the >following error: > >modprobe bttv >modprobe -v dvb-bt8xx >insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/lgdt330x.ko >insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/or51211.ko >insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/cx24110.ko >insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/sp887x.ko >insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/dvb-pll.ko >insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/bt8xx/bt878.ko >insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/mt352.ko >insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/nxt6000.ko >insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/dvb-core/dvb-core.ko >insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/bt8xx/dvb-bt8xx.ko >FATAL: Error inserting dvb_bt8xx (/lib/modules/2.6.14/kernel/drivers/media/dvb/bt8xx/dvb-bt8xx.ko): Unknown symbol in module, or unknown parameter (see dmesg) > >|Nov 29 10:57:44 zaphod kernel: Linux video capture interface: v1.00 >|Nov 29 10:57:44 zaphod kernel: bttv: driver version 0.9.16 loaded >|Nov 29 10:57:44 zaphod kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture >|Nov 29 10:57:44 zaphod kernel: bttv: Bt8xx card found (0). >|Nov 29 10:57:44 zaphod kernel: ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNK1] -> GSI 12 (level, low) -> IRQ 12 >|Nov 29 10:57:44 zaphod kernel: bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 12, latency: 32, mmio: 0xda000000 >|Nov 29 10:57:44 zaphod kernel: bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771 >|Nov 29 10:57:44 zaphod kernel: bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected] >|Nov 29 10:57:44 zaphod kernel: bttv0: gpio: en=00000000, out=00000000 in=00df1cdf [init] >|Nov 29 10:57:44 zaphod kernel: bttv0: using tuner=4 >|Nov 29 10:57:44 zaphod kernel: bttv0: registered device video0 >|Nov 29 10:57:44 zaphod kernel: bttv0: registered device vbi0 >|Nov 29 10:57:44 zaphod kernel: bttv0: PLL: 28636363 => 35468950 . ok >|Nov 29 10:57:44 zaphod kernel: bttv0: add subdevice "remote0" >|Nov 29 10:57:44 zaphod kernel: bttv0: add subdevice "dvb0" >|Nov 29 10:57:44 zaphod udev[8109]: creating device node '/dev/vbi0' >|Nov 29 10:57:44 zaphod udev[8108]: creating device node '/dev/video0' >|Nov 29 10:57:53 zaphod kernel: bt878: AUDIO driver version 0.0.0 loaded >|Nov 29 10:57:53 zaphod kernel: bt878: Bt878 AUDIO function found (0). >|Nov 29 10:57:53 zaphod kernel: ACPI: PCI Interrupt 0000:01:0a.1[A] -> Link [LNK1] -> GSI 12 (level, low) -> IRQ 12 >|Nov 29 10:57:53 zaphod kernel: bt878(0): Bt878 (rev 17) at 01:0a.1, irq: 12, latency: 32, memory: 0xda001000 >|Nov 29 10:58:07 zaphod kernel: dvb_bt8xx: Unknown symbol dst_attach >|Nov 29 10:58:07 zaphod kernel: dvb_bt8xx: Unknown symbol dst_ca_attach > >CVS from 26.11.2005 (before merge) works fine. > >Any hints? > > > Please refresh your sources and try again -- I had to separate DST from the DVB-BT8XX build before we merged the trees, and I forgot to revert it after they were merged... fixed now. Cheers, Michael Krufky
