[Patch] Added Nova-S-Plus and Nova-SE2 DVB-S support
[Patch] Code cleanup and removed most of the debug related stuff
Signed-off-by: Steven Toth <stoth@xxxxxxxxxxxxx>
-------------- next part --------------
diff -Nur dvb-kernel/linux/drivers/media/dvb/frontends/cx24123.c dvb-kernel-cleanup/linux/drivers/media/dvb/frontends/cx24123.c
--- dvb-kernel/linux/drivers/media/dvb/frontends/cx24123.c 1969-12-31 19:00:00.000000000 -0500
+++ dvb-kernel-cleanup/linux/drivers/media/dvb/frontends/cx24123.c 2005-11-15 20:27:16.000000000 -0500
@@ -0,0 +1,694 @@
+/*
+ Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
+
+ Copyright (C) 2005 Steven Toth <stoth@xxxxxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+
+#include "dvb_frontend.h"
+#include "cx24123.h"
+
+static int debug;
+#define dprintk(args...) \
+ do { \
+ if (debug) printk (KERN_DEBUG "cx24123: " args); \
+ } while (0)
+
+struct cx24123_state {
+
+ struct i2c_adapter* i2c;
+ struct dvb_frontend_ops ops;
+ const struct cx24123_config* config;
+
+ struct dvb_frontend frontend;
+
+ u32 lastber;
+ u16 snr;
+ u8 lnbreg;
+
+ /* Some PLL specifics for tuning */
+ u32 VCAarg;
+ u32 VGAarg;
+ u32 bandselectarg;
+ u32 pllarg;
+
+ /* The Demod/Tuner can't easily provide these, we cache them */
+ u32 currentfreq;
+ u32 currentsymbolrate;
+};
+
+static struct {
+ u8 reg;
+ u8 data;
+} cx24123_regdata[] =
+{
+ {0x00, 0x03}, /* Reset system */
+ {0x00, 0x00}, /* Clear reset */
+ {0x01, 0x3b}, /* Apply sensible defaults, from an i2c sniffer */
+ {0x03, 0x07},
+ {0x04, 0x10},
+ {0x05, 0x04},
+ {0x06, 0x31},
+ {0x0d, 0x02},
+ {0x0e, 0x03},
+ {0x0f, 0xfe},
+ {0x10, 0x01},
+ {0x14, 0x01},
+ {0x15, 0x98},
+ {0x16, 0x00},
+ {0x17, 0x01},
+ {0x1b, 0x05},
+ {0x1c, 0x80},
+ {0x1d, 0x00},
+ {0x1e, 0x00},
+ {0x20, 0x41},
+ {0x21, 0x15},
+ {0x27, 0x14},
+ {0x28, 0x46},
+ {0x29, 0x00},
+ {0x2a, 0xb0},
+ {0x2b, 0x73},
+ {0x2c, 0x00},
+ {0x2d, 0x00},
+ {0x2e, 0x00},
+ {0x2f, 0x00},
+ {0x30, 0x00},
+ {0x31, 0x00},
+ {0x32, 0x8c},
+ {0x33, 0x00},
+ {0x34, 0x00},
+ {0x35, 0x03},
+ {0x36, 0x02},
+ {0x37, 0x3a},
+ {0x3a, 0x00}, /* Enable AGC accumulator */
+ {0x44, 0x00},
+ {0x45, 0x00},
+ {0x46, 0x05},
+ {0x56, 0x41},
+ {0x57, 0xff},
+ {0x67, 0x83},
+};
+
+static int cx24123_writereg(struct cx24123_state* state, int reg, int data)
+{
+ u8 buf[] = { reg, data };
+ struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
+ int err;
+
+ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+ printk("%s: writereg error(err == %i, reg == 0x%02x,"
+ " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int cx24123_writelnbreg(struct cx24123_state* state, int reg, int data)
+{
+ u8 buf[] = { reg, data };
+ /* fixme: put the intersil addr int the config */
+ struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = buf, .len = 2 };
+ int err;
+
+ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+ printk("%s: writelnbreg error (err == %i, reg == 0x%02x,"
+ " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
+ return -EREMOTEIO;
+ }
+
+ /* cache the write, no way to read back */
+ state->lnbreg = data;
+
+ return 0;
+}
+
+static int cx24123_readreg(struct cx24123_state* state, u8 reg)
+{
+ int ret;
+ u8 b0[] = { reg };
+ u8 b1[] = { 0 };
+ struct i2c_msg msg[] = {
+ { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
+ { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 }
+ };
+
+ ret = i2c_transfer(state->i2c, msg, 2);
+
+ if (ret != 2) {
+ printk("%s: reg=0x%x (error=%d)\n", __FUNCTION__, reg, ret);
+ return ret;
+ }
+
+ return b1[0];
+}
+
+static int cx24123_readlnbreg(struct cx24123_state* state, u8 reg)
+{
+ return state->lnbreg;
+}
+
+static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_inversion_t inversion)
+{
+ switch (inversion) {
+ case INVERSION_OFF:
+ cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) & 0x7f);
+ cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+ break;
+ case INVERSION_ON:
+ cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) | 0x80);
+ cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+ break;
+ case INVERSION_AUTO:
+ cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) & 0x7f);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int cx24123_get_inversion(struct cx24123_state* state, fe_spectral_inversion_t *inversion)
+{
+ u8 val;
+
+ val = cx24123_readreg(state, 0x1b) >> 7;
+
+ if (val == 0)
+ *inversion=INVERSION_OFF;
+ else
+ *inversion=INVERSION_ON;
+
+ return 0;
+}
+
+static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec)
+{
+ if ( (fec < FEC_NONE) || (fec > FEC_AUTO) )
+ fec=FEC_AUTO;
+
+ /* Hardware has 5/11 and 3/5 but are never unused */
+ switch (fec) {
+ case FEC_NONE:
+ return cx24123_writereg(state, 0x0f,0x01);
+ case FEC_1_2:
+ return cx24123_writereg(state, 0x0f, 0x02);
+ case FEC_2_3:
+ return cx24123_writereg(state, 0x0f, 0x04);
+ case FEC_3_4:
+ return cx24123_writereg(state, 0x0f, 0x08);
+ case FEC_5_6:
+ return cx24123_writereg(state, 0x0f, 0x20);
+ case FEC_7_8:
+ return cx24123_writereg(state, 0x0f, 0x80);
+ case FEC_AUTO:
+ return cx24123_writereg(state, 0x0f, 0xae);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec)
+{
+ u8 val;
+
+ val = cx24123_readreg (state, 0x1b) & 0x07;
+ switch (val) {
+ case 1:
+ *fec=FEC_1_2;
+ return 0;
+ case 3:
+ *fec=FEC_2_3;
+ return 0;
+ case 4:
+ *fec=FEC_3_4;
+ return 0;
+ case 5:
+ *fec=FEC_4_5;
+ return 0;
+ case 6:
+ *fec=FEC_5_6;
+ return 0;
+ case 7:
+ *fec=FEC_7_8;
+ return 0;
+ case 2: /* *fec=FEC_3_5; return 0; */
+ case 0: /* *fec=FEC_5_11; return 0; */
+ *fec=FEC_AUTO;
+ return 0;
+ default:
+ *fec=FEC_NONE; return 0;
+ }
+
+ return -EREMOTEIO;
+}
+
+/* fixme: Symbol rates < 3MSps may not work because of precision loss */
+static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate)
+{
+ u32 val;
+
+ val = (srate/1185)*100;
+
+ /* Compensate for scaling up, by removing 17 symbols per 1Msps */
+ val = val - (17*(srate / 1000000));
+
+ cx24123_writereg(state, 0x08, (val >>16) & 0xff );
+ cx24123_writereg(state, 0x09, (val >> 8) & 0xff );
+ cx24123_writereg(state, 0x0a, (val ) & 0xff );
+
+ return 0;
+}
+
+/*
+ * Based on the required frequency and symbolrate, the tuner AGC has to be configured
+ * and the correct band selected. Calculate those values
+ */
+static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+ u32 ndiv=0, adiv=0, vco_div=0;
+ int i=0;
+
+ /* Defaults for low freq, low rate */
+ state->VCAarg = cx24123_AGC_vals[0].VCAprogdata;
+ state->VGAarg = cx24123_AGC_vals[0].VGAprogdata;
+ state->bandselectarg = cx24123_bandselect_vals[0].progdata;
+ vco_div = cx24123_bandselect_vals[0].VCOdivider;
+
+ /* For the given symbolerate, determine the VCA and VGA programming bits */
+ for (i=0; i < sizeof(cx24123_AGC_vals) / sizeof(cx24123_AGC_vals[0]); i++)
+ {
+ if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) &&
+ (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
+ state->VCAarg = cx24123_AGC_vals[i].VCAprogdata;
+ state->VGAarg = cx24123_AGC_vals[i].VGAprogdata;
+ }
+ }
+
+ /* For the given frequency, determine the bandselect programming bits */
+ for (i=0; i < sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]); i++)
+ {
+ if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
+ (cx24123_bandselect_vals[i].freq_high >= p->frequency) ) {
+ state->bandselectarg = cx24123_bandselect_vals[i].progdata;
+ vco_div = cx24123_bandselect_vals[i].VCOdivider;
+ }
+ }
+
+ /* Determine the N/A dividers for the requested lband freq (in kHz). */
+ /* Note: 10111 (kHz) is the Crystal Freq and divider of 10. */
+ ndiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) / 32) & 0x1ff;
+ adiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) % 32) & 0x1f;
+
+ if (adiv == 0)
+ adiv++;
+
+ /* determine the correct pll frequency values. */
+ /* Command 11, refdiv 11, cpump polarity 1, cpump current 3mA 10. */
+ state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (2 << 14);
+ state->pllarg |= (ndiv << 5) | adiv;
+
+ return 0;
+}
+
+/*
+ * Tuner data is 21 bits long, must be left-aligned in data.
+ * Tuner cx24109 is written through a dedicated 3wire interface on the demod chip.
+ */
+static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_parameters *p, u32 data)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+
+ u8 timeout=0;
+
+ /* align the 21 bytes into to bit23 boundary */
+ data = data << 3;
+
+ /* Reset the demod pll word length to 0x15 bits */
+ cx24123_writereg(state, 0x21, 0x15);
+
+ timeout=0;
+ /* write the msb 8 bits, wait for the send to be completed */
+ cx24123_writereg(state, 0x22, (data>>16) & 0xff);
+ while ( ( cx24123_readreg(state, 0x20) & 0x40 ) == 0 )
+ {
+ /* Safety - No reason why the write should not complete, and we never get here, avoid hang */
+ if (timeout++ >= 4) {
+ printk("%s: demodulator is no longer responding, aborting.\n",__FUNCTION__);
+ return -EREMOTEIO;
+ }
+ msleep(500);
+ }
+
+ timeout=0;
+ /* send another 8 bytes, wait for the send to be completed */
+ cx24123_writereg(state, 0x22, (data>>8) & 0xff );
+ while ( (cx24123_readreg(state, 0x20) & 0x40 ) == 0 )
+ {
+ /* Safety - No reason why the write should not complete, and we never get here, avoid hang */
+ if (timeout++ >= 4) {
+ printk("%s: demodulator is not responding, possibly hung, aborting.\n",__FUNCTION__);
+ return -EREMOTEIO;
+ }
+ msleep(500);
+ }
+
+ timeout=0;
+ /* send the lower 5 bits of this byte, padded with 3 LBB, wait for the send to be completed */
+ cx24123_writereg(state, 0x22, (data) & 0xff );
+ while ((cx24123_readreg(state, 0x20) & 0x80))
+ {
+ /* Safety - No reason why the write should not complete, and we never get here, avoid hang */
+ if (timeout++ >= 4) {
+ printk("%s: demodulator is not responding, possibly hung, aborting.\n",__FUNCTION__);
+ return -EREMOTEIO;
+ }
+ msleep(500);
+ }
+
+ /* Trigger the demod to configure the tuner */
+ cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) | 2);
+ cx24123_writereg(state, 0x20, cx24123_readreg(state, 0x20) & 0xfd);
+
+ return 0;
+}
+
+static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+
+ if (cx24123_pll_calculate(fe, p)!=0) {
+ printk("%s: cx24123_pll_calcutate failed\n",__FUNCTION__);
+ return -EINVAL;
+ }
+
+ /* Write the new VCO/VGA */
+ cx24123_pll_writereg(fe, p, state->VCAarg);
+ cx24123_pll_writereg(fe, p, state->VGAarg);
+
+ /* Write the new bandselect and pll args */
+ cx24123_pll_writereg(fe, p, state->bandselectarg);
+ cx24123_pll_writereg(fe, p, state->pllarg);
+
+ return 0;
+}
+
+static int cx24123_initfe(struct dvb_frontend* fe)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+ int i;
+
+ /* Configure the demod to a good set of defaults */
+ for (i=0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++)
+ cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data);
+
+ if (state->config->pll_init)
+ state->config->pll_init(fe);
+
+ /* Configure the LNB for 14V */
+ cx24123_writelnbreg(state, 0x0, 0x2a);
+
+ return 0;
+}
+
+static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+ u8 val;
+
+ val = cx24123_readlnbreg(state, 0x0);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ return cx24123_writelnbreg(state, 0x0, val & 0x32); /* V 13v */
+ case SEC_VOLTAGE_18:
+ return cx24123_writelnbreg(state, 0x0, val | 0x04); /* H 18v */
+ case SEC_VOLTAGE_OFF:
+ return cx24123_writelnbreg(state, 0x0, val & 0x30);
+ default:
+ return -EINVAL;
+ };
+}
+
+static int cx24123_send_diseqc_msg(struct dvb_frontend* fe,
+ struct dvb_diseqc_master_cmd *cmd)
+{
+ /* fixme: Implement diseqc */
+ printk("%s: No support yet\n",__FUNCTION__);
+
+ return -ENOTSUPP;
+}
+
+static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+
+ int sync = cx24123_readreg(state, 0x14);
+ int lock = cx24123_readreg(state, 0x20);
+
+ *status = 0;
+ if (lock & 0x01)
+ *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
+ if (sync & 0x04)
+ *status |= FE_HAS_VITERBI;
+ if (sync & 0x08)
+ *status |= FE_HAS_CARRIER;
+ if (sync & 0x80)
+ *status |= FE_HAS_SYNC | FE_HAS_LOCK;
+
+ return 0;
+}
+
+/*
+ * Configured to return the measurement of errors in blocks, because no UCBLOCKS value
+ * is available, so this value doubles up to satisfy both measurements
+ */
+static int cx24123_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+
+ state->lastber =
+ ((cx24123_readreg(state, 0x1c) & 0x3f) << 16) |
+ (cx24123_readreg(state, 0x1d) << 8 |
+ cx24123_readreg(state, 0x1e));
+
+ /* Do the signal quality processing here, it's derived from the BER. */
+ /* Scale the BER from a 24bit to a SNR 16 bit where higher = better */
+ if (state->lastber < 5000)
+ state->snr = 655*100;
+ else if ( (state->lastber >= 5000) && (state->lastber < 55000) )
+ state->snr = 655*90;
+ else if ( (state->lastber >= 55000) && (state->lastber < 150000) )
+ state->snr = 655*80;
+ else if ( (state->lastber >= 150000) && (state->lastber < 250000) )
+ state->snr = 655*70;
+ else if ( (state->lastber >= 250000) && (state->lastber < 450000) )
+ state->snr = 655*65;
+ else
+ state->snr = 0;
+
+ *ber = state->lastber;
+
+ return 0;
+}
+
+static int cx24123_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+ *signal_strength = cx24123_readreg(state, 0x3b) << 8; /* larger = better */
+
+ return 0;
+}
+
+static int cx24123_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+ *snr = state->snr;
+
+ return 0;
+}
+
+static int cx24123_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+ *ucblocks = state->lastber;
+
+ return 0;
+}
+
+static int cx24123_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+
+ if (state->config->set_ts_params)
+ state->config->set_ts_params(fe, 0);
+
+ state->currentfreq=p->frequency;
+ state->currentsymbolrate=p->u.qpsk.symbol_rate;
+
+ cx24123_set_inversion(state, p->inversion);
+ cx24123_set_fec(state, p->u.qpsk.fec_inner);
+ cx24123_set_symbolrate(state, p->u.qpsk.symbol_rate);
+ cx24123_pll_tune(fe, p);
+
+ /* Enable automatic aquisition and reset cycle */
+ cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07) );
+ cx24123_writereg(state, 0x00, 0x10);
+ cx24123_writereg(state, 0x00, 0);
+
+ return 0;
+}
+
+static int cx24123_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+
+ if (cx24123_get_inversion(state, &p->inversion) != 0) {
+ printk("%s: Failed to get inversion status\n",__FUNCTION__);
+ return -EREMOTEIO;
+ }
+ if (cx24123_get_fec(state, &p->u.qpsk.fec_inner) != 0) {
+ printk("%s: Failed to get fec status\n",__FUNCTION__);
+ return -EREMOTEIO;
+ }
+ p->frequency = state->currentfreq;
+ p->u.qpsk.symbol_rate = state->currentsymbolrate;
+
+ return 0;
+}
+
+static int cx24123_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+ u8 val;
+
+ val = cx24123_readlnbreg(state, 0x0);
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ return cx24123_writelnbreg(state, 0x0, val | 0x10);
+ case SEC_TONE_OFF:
+ return cx24123_writelnbreg(state, 0x0, val & 0x2f);
+ default:
+ printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone);
+ return -EINVAL;
+ }
+}
+
+static void cx24123_release(struct dvb_frontend* fe)
+{
+ struct cx24123_state* state = fe->demodulator_priv;
+ dprintk("%s\n",__FUNCTION__);
+ kfree(state);
+}
+
+static struct dvb_frontend_ops cx24123_ops;
+
+struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, struct i2c_adapter* i2c)
+{
+ struct cx24123_state* state = NULL;
+ int ret;
+
+ dprintk("%s\n",__FUNCTION__);
+
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct cx24123_state), GFP_KERNEL);
+ if (state == NULL) {
+ printk("Unable to kmalloc\n");
+ goto error;
+ }
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ memcpy(&state->ops, &cx24123_ops, sizeof(struct dvb_frontend_ops));
+ state->lastber = 0;
+ state->snr = 0;
+ state->lnbreg = 0;
+ state->VCAarg = 0;
+ state->VGAarg = 0;
+ state->bandselectarg = 0;
+ state->pllarg = 0;
+ state->currentfreq = 0;
+ state->currentsymbolrate = 0;
+
+ /* check if the demod is there */
+ ret = cx24123_readreg(state, 0x00);
+ if ((ret != 0xd1) && (ret != 0xe1)) {
+ printk("Version != d1 or e1\n");
+ goto error;
+ }
+
+ /* create dvb_frontend */
+ state->frontend.ops = &state->ops;
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+
+error:
+ kfree(state);
+
+ return NULL;
+}
+
+static struct dvb_frontend_ops cx24123_ops = {
+
+ .info = {
+ .name = "Conexant CX24123/CX24109",
+ .type = FE_QPSK,
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_stepsize = 1011, /* kHz for QPSK frontends */
+ .frequency_tolerance = 29500,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_RECOVER
+ },
+
+ .release = cx24123_release,
+
+ .init = cx24123_initfe,
+ .set_frontend = cx24123_set_frontend,
+ .get_frontend = cx24123_get_frontend,
+ .read_status = cx24123_read_status,
+ .read_ber = cx24123_read_ber,
+ .read_signal_strength = cx24123_read_signal_strength,
+ .read_snr = cx24123_read_snr,
+ .read_ucblocks = cx24123_read_ucblocks,
+ .diseqc_send_master_cmd = cx24123_send_diseqc_msg,
+ .set_tone = cx24123_set_tone,
+ .set_voltage = cx24123_set_voltage,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24123/cx24109 hardware");
+MODULE_AUTHOR("Steven Toth");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(cx24123_attach);
+
diff -Nur dvb-kernel/linux/drivers/media/dvb/frontends/cx24123.h dvb-kernel-cleanup/linux/drivers/media/dvb/frontends/cx24123.h
--- dvb-kernel/linux/drivers/media/dvb/frontends/cx24123.h 1969-12-31 19:00:00.000000000 -0500
+++ dvb-kernel-cleanup/linux/drivers/media/dvb/frontends/cx24123.h 2005-11-15 19:49:49.000000000 -0500
@@ -0,0 +1,185 @@
+/*
+ Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
+
+ Copyright (C) 2005 Steven Toth <stoth@xxxxxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef CX24123_H
+#define CX24123_H
+
+#include <linux/dvb/frontend.h>
+
+struct cx24123_config
+{
+ /* the demodulator's i2c address */
+ u8 demod_address;
+
+ /* PLL maintenance */
+ int (*pll_init)(struct dvb_frontend* fe);
+ int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
+
+ /* Need to set device param for start_dma */
+ int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
+};
+
+/* Various tuner defaults need to be established for a given symbol rate Sps */
+struct
+{
+ u32 symbolrate_low;
+ u32 symbolrate_high;
+ u32 VCAslope;
+ u32 VCAoffset;
+ u32 VGA1offset;
+ u32 VGA2offset;
+ u32 VCAprogdata;
+ u32 VGAprogdata;
+} cx24123_AGC_vals[] =
+{
+ {
+ .symbolrate_low = 1000000,
+ .symbolrate_high = 4999999,
+ .VCAslope = 0x07,
+ .VCAoffset = 0x0f,
+ .VGA1offset = 0x1f8,
+ .VGA2offset = 0x1f8,
+ .VGAprogdata = (2 << 18) | (0x1f8 << 9) | 0x1f8,
+ .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x07,
+ },
+ {
+ .symbolrate_low = 5000000,
+ .symbolrate_high = 14999999,
+ .VCAslope = 0x1f,
+ .VCAoffset = 0x1f,
+ .VGA1offset = 0x1e0,
+ .VGA2offset = 0x180,
+ .VGAprogdata = (2 << 18) | (0x180 << 9) | 0x1e0,
+ .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x1f,
+ },
+ {
+ .symbolrate_low = 15000000,
+ .symbolrate_high = 45000000,
+ .VCAslope = 0x3f,
+ .VCAoffset = 0x3f,
+ .VGA1offset = 0x180,
+ .VGA2offset = 0x100,
+ .VGAprogdata = (2 << 18) | (0x100 << 9) | 0x180,
+ .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x3f,
+ },
+};
+
+/*
+ * Various tuner defaults need to be established for a given frequency kHz.
+ * fixme: The bounds on the bands do not match the doc in real life.
+ * fixme: Some of them have been moved, other might need adjustment.
+ */
+struct
+{
+ u32 freq_low;
+ u32 freq_high;
+ u32 bandselect;
+ u32 VCOdivider;
+ u32 VCOnumber;
+ u32 progdata;
+} cx24123_bandselect_vals[] =
+{
+ {
+ .freq_low = 950000,
+ .freq_high = 1018999,
+ .bandselect = 0x40,
+ .VCOdivider = 4,
+ .VCOnumber = 7,
+ .progdata = (0 << 18) | (0 << 9) | 0x40,
+ },
+ {
+ .freq_low = 1019000,
+ .freq_high = 1074999,
+ .bandselect = 0x80,
+ .VCOdivider = 4,
+ .VCOnumber = 8,
+ .progdata = (0 << 18) | (0 << 9) | 0x80,
+ },
+ {
+ .freq_low = 1075000,
+ .freq_high = 1227999,
+ .bandselect = 0x01,
+ .VCOdivider = 2,
+ .VCOnumber = 1,
+ .progdata = (0 << 18) | (1 << 9) | 0x01,
+ },
+ {
+ .freq_low = 1228000,
+ .freq_high = 1349999,
+ .bandselect = 0x02,
+ .VCOdivider = 2,
+ .VCOnumber = 2,
+ .progdata = (0 << 18) | (1 << 9) | 0x02,
+ },
+ {
+ .freq_low = 1350000,
+ .freq_high = 1481999,
+ .bandselect = 0x04,
+ .VCOdivider = 2,
+ .VCOnumber = 3,
+ .progdata = (0 << 18) | (1 << 9) | 0x04,
+ },
+ {
+ .freq_low = 1482000,
+ .freq_high = 1595999,
+ .bandselect = 0x08,
+ .VCOdivider = 2,
+ .VCOnumber = 4,
+ .progdata = (0 << 18) | (1 << 9) | 0x08,
+ },
+ {
+ .freq_low = 1596000,
+ .freq_high = 1717999,
+ .bandselect = 0x10,
+ .VCOdivider = 2,
+ .VCOnumber = 5,
+ .progdata = (0 << 18) | (1 << 9) | 0x10,
+ },
+ {
+ .freq_low = 1718000,
+ .freq_high = 1855999,
+ .bandselect = 0x20,
+ .VCOdivider = 2,
+ .VCOnumber = 6,
+ .progdata = (0 << 18) | (1 << 9) | 0x20,
+ },
+ {
+ .freq_low = 1856000,
+ .freq_high = 2035999,
+ .bandselect = 0x40,
+ .VCOdivider = 2,
+ .VCOnumber = 7,
+ .progdata = (0 << 18) | (1 << 9) | 0x40,
+ },
+ {
+ .freq_low = 2036000,
+ .freq_high = 2149999,
+ .bandselect = 0x80,
+ .VCOdivider = 2,
+ .VCOnumber = 8,
+ .progdata = (0 << 18) | (1 << 9) | 0x80,
+ },
+};
+
+extern struct dvb_frontend* cx24123_attach(const struct cx24123_config* config,
+ struct i2c_adapter* i2c);
+
+#endif /* CX24123_H */
+
diff -Nur dvb-kernel/linux/drivers/media/dvb/frontends/Kconfig dvb-kernel-cleanup/linux/drivers/media/dvb/frontends/Kconfig
--- dvb-kernel/linux/drivers/media/dvb/frontends/Kconfig 2005-10-27 00:11:59.000000000 -0400
+++ dvb-kernel-cleanup/linux/drivers/media/dvb/frontends/Kconfig 2005-11-14 15:00:55.000000000 -0500
@@ -16,6 +16,12 @@
help
A DVB-S tuner module. Say Y when you want to support this frontend.
+config DVB_CX24123
+ tristate "Conexant CX24123 based"
+ depends on DVB_CORE
+ help
+ A DVB-S tuner module. Say Y when you want to support this frontend.
+
config DVB_TDA8083
tristate "Philips TDA8083 based"
depends on DVB_CORE
diff -Nur dvb-kernel/linux/drivers/media/dvb/frontends/Makefile dvb-kernel-cleanup/linux/drivers/media/dvb/frontends/Makefile
--- dvb-kernel/linux/drivers/media/dvb/frontends/Makefile 2005-11-03 09:51:41.000000000 -0500
+++ dvb-kernel-cleanup/linux/drivers/media/dvb/frontends/Makefile 2005-11-14 15:00:55.000000000 -0500
@@ -32,3 +32,4 @@
obj-$(CONFIG_DVB_BCM3510) += bcm3510.o
obj-$(CONFIG_DVB_S5H1420) += s5h1420.o
obj-$(CONFIG_DVB_LGDT330X) += lgdt330x.o
+obj-$(CONFIG_DVB_CX24123) += cx24123.o
