HI,
linuxtv@xxxxxxxxxxxxxxxxxx wrote:
>>Hi,
>>
>>I just committed an update of the tda1004x dvb-t driver to the dvb-kernel
>>CVS. It only affects the tda10046 (hopefully):
>>
>>- fixed oddities at firmware download from eeprom.
>>- more tolerant vs crystal frequency offset. It should now work with up
>> to -/+100ppm deviation. This can be the cause why some boards like
>> the Lifeview just didn't work for some users.
>>- lower sampling clock to 48Mhz for low IF and 53MHz for 36MHz. Together
>> with some other minor changes, this increases the sensitivity a bit.
>>- doesn't touch the GPIOs any longer. This needs to be handled by the
>> board layer.
>>
>>The latter change might cause incompatibilities. However, it is necessary
>>since the pins are used very differently. I could not find problems with
>>boards i have access to.
>>
>>Have Fun
>> Hartmut
>
> Hello,
>
> Is it possible that the tda1004x update is causing the
> "tuner 2-0060: microtune unknown found, not (yet?) supported, sorry :-/"
> error message I'm now seeing?
>
> I don't know how to find out. I'm new to this cvs stuff.
>
> Please accept my appologies if I'm barking up the wrong tree.
No, the tda1004x can't create this problem.
The pinnacle does not even need this module.
Best regards
Hartmut
