I'm starting to wonder if the Nexus 2.3 is supported yet. I'm running kernel 2.6.14 with today's CVS and when trying to tune in echostar @ 119 I get the following. As I stated in an earlier question I'm using this through a 22khz switch and I need 22khz on. - Mark. corbin2:/usr/src/dvb-apps/util/scan/dvb-s# dvbscan -lDBS /etc/sats/echostar-119w scanning /etc/sats/echostar-119w using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12224000 V 20000000 5 initial transponder 12239000 H 20000000 5 initial transponder 12253000 V 20000000 5 initial transponder 12268000 H 20000000 5 initial transponder 12282000 V 20000000 5 initial transponder 12297000 H 20000000 5 initial transponder 12311000 V 20000000 5 initial transponder 12326000 H 20000000 5 initial transponder 12341000 V 20000000 5 initial transponder 12355000 H 20000000 5 initial transponder 12370000 V 20000000 5 initial transponder 12384000 H 20000000 5 initial transponder 12399000 V 20000000 5 initial transponder 12414000 H 20000000 5 initial transponder 12428000 V 20000000 5 initial transponder 12443000 H 20000000 5 initial transponder 12457000 V 20000000 3 initial transponder 12472000 H 20000000 3 initial transponder 12486000 V 20000000 3 initial transponder 12501000 H 20000000 3 initial transponder 12516000 V 20000000 3 >>> tune to: 12224:v:0:20000 WARNING: >>> tuning failed!!! >>> tune to: 12224:v:0:20000 (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 12239:h:0:20000 ERROR: interrupted by SIGINT, dumping partial result... dumping lists (0 services) Done. corbin2:/usr/src/dvb-apps/util/scan/dvb-s# dvbscan -lDBS /etc/sats/echostar-119w -v scanning /etc/sats/echostar-119w using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12224000 V 20000000 5 initial transponder 12239000 H 20000000 5 initial transponder 12253000 V 20000000 5 initial transponder 12268000 H 20000000 5 initial transponder 12282000 V 20000000 5 initial transponder 12297000 H 20000000 5 initial transponder 12311000 V 20000000 5 initial transponder 12326000 H 20000000 5 initial transponder 12341000 V 20000000 5 initial transponder 12355000 H 20000000 5 initial transponder 12370000 V 20000000 5 initial transponder 12384000 H 20000000 5 initial transponder 12399000 V 20000000 5 initial transponder 12414000 H 20000000 5 initial transponder 12428000 V 20000000 5 initial transponder 12443000 H 20000000 5 initial transponder 12457000 V 20000000 3 initial transponder 12472000 H 20000000 3 initial transponder 12486000 V 20000000 3 initial transponder 12501000 H 20000000 3 initial transponder 12516000 V 20000000 3 >>> tune to: 12224:v:0:20000 DiSEqC: switch pos 0, 13V, loband (index 0) >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 WARNING: >>> tuning failed!!! >>> tune to: 12224:v:0:20000 (tuning failed) DiSEqC: switch pos 0, 13V, loband (index 0) >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 WARNING: >>> tuning failed!!! >>> tune to: 12239:h:0:20000 DiSEqC: switch pos 0, 18V, loband (index 1) >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 WARNING: >>> tuning failed!!! >>> tune to: 12239:h:0:20000 (tuning failed) DiSEqC: switch pos 0, 18V, loband (index 1) ... -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20051106/155e8eef/attachment-0001.htm
