Oliver Endriss wrote: > Andrew de Quincey wrote: > > As the subject says - lemme know this causes any problems... > > I don't know if this causes any problems: > For philips_su1278 the old code set register 0x12 to 0xda in the > budget-ci driver. Now register 0x12 is overwritten with 0xb9. > > What about these additional modifications: > > Index: stv0299.c > =================================================================== > RCS file: /cvs/linuxtv/dvb-kernel/linux/drivers/media/dvb/frontends/stv0299.c,v > retrieving revision 1.72 > diff -p -u -r1.72 stv0299.c > --- stv0299.c 3 Oct 2005 14:20:43 -0000 1.72 > +++ stv0299.c 6 Oct 2005 14:32:46 -0000 > @@ -560,8 +560,6 @@ static int stv0299_set_frontend(struct d > stv0299_set_symbolrate (fe, p->u.qpsk.symbol_rate); > stv0299_writeregI(state, 0x22, 0x00); > stv0299_writeregI(state, 0x23, 0x00); > - stv0299_readreg (state, 0x23); > - stv0299_writeregI(state, 0x12, 0xb9); > > state->tuner_frequency = p->frequency; > state->fec_inner = p->u.qpsk.fec_inner; > > Imho the deleted lines are not required (tested with BSRU6). > Register 0x12 should be set using xxx_inittab. > (inittabs for BSRU6/BSBE1 need to be adjusted: 0xb5 -> 0xb9, > for philips_su1278 0xda is used.) > > Any comments? Ok, last chance: ;-) If nobody objects I will apply the patch above and adjust inittabs for BSRU6 and BSBE1 accordingly. Oliver -- -------------------------------------------------------- VDR Remote Plugin available at http://www.escape-edv.de/endriss/vdr/ --------------------------------------------------------
