Michael, aren't the devices supposed to be created automatically by the module? Phillip, check this thread ([linux-dvb] TDA9887 Problem - FusionHDTV5 Lite) and post your dmesg, you might be affected by the same bug I have (if you're using the latest CVS) On 10/17/05, Michael Krufky <mkrufky@xxxxxxxxxxx> wrote: > Philip Prindeville wrote: > > Michael Krufky wrote: > > > >> Philip Prindeville wrote: > >> > >>> Hi. > >>> > >>> I have an x86_64 (Athalon 64) based Fedora Core 3 machine (updated) > >>> with the following: 2x Twinhan DST cards, and 1x pchd 3000 card. > >>> > >>> However, /dev/dvb/ isn't being populated. > >>> > >>> Anyone have any suggestions about what is missing? Does udev need > >>> some priming? What needs to be in my /etc/modprobe.conf file? > >>> > >>> Thanks, > >>> > >>> -Philip > >> > >> > >> > >> For the twinhan DST cards, you need the module dvb-bt8xx ... It > >> requires some module arguments in order to function properly. Please > >> see the Documentation / list archives for that info. > >> > >> For pchd 3000, cx88-dvb . > >> > >> Cheers, > >> > >> Michael Krufky > > > > > > > > I already looked for the Twinhan, but didn't see suggestions on how to > > set up the /etc/modprobe.conf (other than the card type being 0x71) or > > Twinhan needs i2c_hw=1 .... There was a thread about it a few days ago. > > > why the /dev/dvb/* stuff was failing to be created. > > MAKEDEV dvb > > It's all covered in the documentation... Here's a link to the latest > doc's in cvs: > > http://linuxtv.org/cgi-bin/viewcvs.cgi/dvb-kernel/linux/Documentation/dvb/ > > > -- > Michael Krufky > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >
