OK, that didn't work either. Plain vanilla kernel (latest stable 2.6.13.4) configured with "just" what I need. CVS v4l + dvb. Same error. Now analog tv doesn't work either... dmesg: Linux video capture interface: v1.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK0] -> GSI 5 (level, low) -> IRQ 5 bttv0: Bt878 (rev 17) at 0000:02:02.0, irq: 5, latency: 32, mmio: 0xdb100000 bttv0: detected: DViCO FusionHDTV 5 Lite [card=135], PCI subsystem ID is 18ac:d500 bttv0: using: DViCO FusionHDTV 5 Lite [card=135,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: using tuner=64 tuner 0-0043: chip found @ 0x86 (bt878 #0 [sw]) tuner 0-0043: type set to 64 (LG TDVS-H062F/TUA6034) tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:02:02.1[A] -> Link [LNK0] -> GSI 5 (level, low) -> IRQ 5 bt878(0): Bt878 (rev 17) at 02:02.1, irq: 5, latency: 32, memory: 0xdb101000 ............ #modprobe -v dvb-bt8xx insmod /lib/modules/2.6.13.4-MythBackend/kernel/drivers/media/dvb/frontends/lgdt330x.ko insmod /lib/modules/2.6.13.4-MythBackend/kernel/drivers/media/dvb/frontends/or51211.ko insmod /lib/modules/2.6.13.4-MythBackend/kernel/drivers/media/dvb/frontends/cx24110.ko insmod /lib/modules/2.6.13.4-MythBackend/kernel/drivers/media/dvb/dvb-core/dvb-core.ko insmod /lib/modules/2.6.13.4-MythBackend/kernel/drivers/media/dvb/bt8xx/dst.ko insmod /lib/modules/2.6.13.4-MythBackend/kernel/drivers/media/dvb/bt8xx/dst_ca.ko insmod /lib/modules/2.6.13.4-MythBackend/kernel/drivers/media/dvb/frontends/sp887x.ko insmod /lib/modules/2.6.13.4-MythBackend/kernel/drivers/media/dvb/frontends/dvb-pll.ko insmod /lib/modules/2.6.13.4-MythBackend/kernel/drivers/media/dvb/frontends/mt352.ko insmod /lib/modules/2.6.13.4-MythBackend/kernel/drivers/media/dvb/frontends/nxt6000.ko insmod /lib/modules/2.6.13.4-MythBackend/kernel/drivers/media/dvb/bt8xx/dvb-bt8xx.ko dmesg: DVB: registering new adapter (bttv0). dvb_bt8xx: dvb_dmx_init failed (errno = -12) dvb-bt8xx: probe of dvb0 failed with error -12 On 10/16/05, Luis Ochoa <luis.m.ochoa@xxxxxxxxx> wrote: > Thanks, I'll try that. > > I realized that I wasn't completely correct before, I didn't follow > the instructions of not installing ANY driver kernels (step 1in the > Wiki). I couldn't even get analog working (using tvtime) so I > recompiled the FC4 kernel with no drivers, and then added CVS, and I > got Analog (although just video, how do you get analog audio from this > board? do you have to use a patch cable between it and the sound > card?) but the dvb error was still there. > > I'll try a vanilla kernel. > > Thanks again, Luis. > > On 10/16/05, Michael Krufky <mkrufky@xxxxxxxxxxx> wrote: > > Luis Ochoa wrote: > > > Hi all, > > > I have the latest CVS dvb-kernel and v4l-kernel compiled and installed > > > as per the Wiki. > > > Here's the info...any ideas? Thanks! > > > > > > uname -r: > > > 2.6.13-1.1526_FC4 > > > > > [snip] > > > Oct 15 22:00:16 localhost kernel: DVB: registering new adapter (bttv0). > > > Oct 15 22:00:16 localhost kernel: dvb_bt8xx: dvb_dmx_init failed (errno = -12) > > > Oct 15 22:00:16 localhost kernel: dvb-bt8xx: probe of dvb0 failed with error -12 > > > > I've heard this problem from many users of FC4 kernel.... Try a vanilla > > 2.6.13.y kernel from kernel.org ... Then install merged cvs on top of that. > > > > This is a DVB problem, and it is NOT local to FusionHDTV5 Lite, or > > dvb-bt8xx. > > > > -- > > Michael Krufky > > >
