Hi, Philippe
Please do the following:
Get a recent version of the driver from the video4linux CVS at
www.linuxtv.org. It creates a longer eeprom dump. I can tell the
configuration and tuner type from it If the card works with un-
modified Philips drivers.
Best regards
Hartmut
>
> #dmesg
> saa7130/34: v4l2 driver version 0.2.12 loaded
> ACPI: PCI interrupt 0000:03:02.0[A] -> GSI 11 (level, low) -> IRQ 11
> saa7133[0]: found at 0000:03:02.0, rev: 209, irq: 11, latency: 64, mmio:
> 0xfeafa800
> saa7133[0]: subsystem: 5168:0307, board: AOPEN VA1000 POWER [card=17,insmod
> option]
> saa7133[0]: board init: gpio is 50000
> saa7133[0]: dsp access wait timeout [bit=WRR]
> saa7133[0]: dsp access wait timeout [bit=WRR]
> saa7133[0]: i2c eeprom 00: 68 51 07 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7133[0]: i2c eeprom 10: 00 ff 62 0f ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 ed ff ff ff ff
> saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: registered device video0 [v4l2]
> saa7133[0]: registered device vbi0
>
