IR code has now been included in CVS, see my post on this list entitled 'noob question'.. I've had the same instructions to follow which seemed to work on my 2.6.13.2 kernel, however I think I was missing the last modprobe stage.. I'll start over again tonight and report my findings here :) On 10/6/05, atkellyx <atkellyx@xxxxxxxxxxxxxxxx> wrote: > Hi Ian > > I am not an expert by any means, but the following did the trick for me > (from various advice from Hartmut Hackmann, Andrew Smith and Michael > Krufky): > > Hi Anthony, > > If it's any help, here's what works for me: > > in your dvb working directory do the following (using an empty password for > cvs): > > cvs -d :pserver:anonymous@xxxxxxxxxxxxxxx :/cvs/linuxtv login > cvs -z3 -d :pserver:anonymous@xxxxxxxxxxxxxxx:/cvs/linuxtv co -P > dvb-kernel > cvs -d :pserver:anonymous@xxxxxxxxxxxxxxx:/cvs/video4linux login > cvs -d :pserver:anonymous@xxxxxxxxxxxxxxx:/cvs/video4linux co -P > video4linux > cd video4linux/ > sh scripts/merge-trees.sh > make > make install > > After this use a modprobe saa7134 card=70 oss=1 > > Sometimes it picks up the card type with the above drivers but not always so > the card=70 just forces the issue. > > Your dmesg should now correctly identify the card. > > There are some patches in this forum for the on card IR input (might even be > in the cvs) which definitely work. I haven't worked out how to use it yet > but it is working. > > good luck > > > > ----- Original Message ----- > From: "Ian McKenzie" <ianmck15@xxxxxxxxxxx> > To: < linux-dvb@xxxxxxxxxxx> > Sent: Thursday, October 06, 2005 8:27 PM > Subject: [linux-dvb] Compro Videomate DVB-T300 > > > > Hi, I have a Videomate DVB-T 300 card and use Slackware 10.2 kernel > > 2.6.13 . > > The card works fine in Windoze (dual-booting) but i would like to get it > > going in linux. This should be possible as others on this mailing list > > seem to have done so. > > After reading a lot of docs and installing various things most things seem > > to be in place but still no joy. > > Here are some readouts: lsmod > > > > Module Size Used by > > ipv6 225600 8 > > snd_pcm_oss 46240 0 > > snd_mixer_oss 15872 1 snd_pcm_oss > > uhci_hcd 29584 0 > > nvidia_agp 5916 1 > > i2c_nforce2 5888 0 > > joydev 8000 0 > > ohci_hcd 18436 0 > > ehci_hcd 29704 0 > > sata_nv 6276 0 > > libata 39940 1 sata_nv > > shpchp 91364 0 > > snd_emu10k1 99460 0 > > snd_rawmidi 19232 1 snd_emu10k1 > > snd_seq_device 6924 2 snd_emu10k1,snd_rawmidi > > snd_ac97_codec 75388 1 snd_emu10k1 > > snd_pcm 75016 3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec > > snd_timer 19716 2 snd_emu10k1,snd_pcm > > snd_page_alloc 7556 2 snd_emu10k1,snd_pcm > > snd_util_mem 3328 1 snd_emu10k1 > > snd_hwdep 6944 1 snd_emu10k1 > > snd 45572 9 > > snd_pcm_oss,snd_mixer_oss,snd_emu10k1,snd_rawmid > > i,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep > > emu10k1_gp 2816 0 > > gameport 11144 2 emu10k1_gp > > 8139too 22016 0 > > mii 4608 1 8139too > > nvidia 3703688 12 > > ext3 122504 2 > > jbd 48024 1 ext3 > > nls_iso8859_1 3968 1 > > nls_cp437 5632 1 > > vfat 10368 1 > > fat 44828 1 vfat > > nls_utf8 1792 2 > > ntfs 182672 2 > > agpgart 28616 2 nvidia_agp,nvidia > > dvb_ttpci 86332 0 > > l64781 6660 1 dvb_ttpci > > saa7146_vv 42880 1 dvb_ttpci > > saa7146 14600 2 dvb_ttpci,saa7146_vv > > ves1820 5252 1 dvb_ttpci > > stv0299 10248 1 dvb_ttpci > > tda8083 5252 1 dvb_ttpci > > stv0297 7424 1 dvb_ttpci > > sp8870 6796 1 dvb_ttpci > > ves1x93 6148 1 dvb_ttpci > > ttpci_eeprom 2304 1 dvb_ttpci > > saa7134_dvb 6788 0 > > mt352 6148 1 saa7134_dvb > > saa7134 105044 1 saa7134_dvb > > v4l2_common 4608 2 saa7146_vv,saa7134 > > v4l1_compat 13060 2 saa7146_vv,saa7134 > > soundcore 6880 2 snd,saa7134 > > ir_common 6916 1 saa7134 > > videodev 7168 2 saa7146_vv,saa7134 > > evdev 7296 0 > > video_buf_dvb 4356 1 saa7134_dvb > > dvb_core 71848 2 dvb_ttpci,video_buf_dvb > > video_buf 16900 4 > > saa7146_vv,saa7134_dvb,saa7134,video_buf_dvb > > tda1004x 13316 1 saa7134_dvb > > firmware_class 7424 4 dvb_ttpci,sp8870,saa7134_dvb,tda1004x > > i2c_core 16656 14 > > i2c_nforce2,dvb_ttpci,l64781,ves1820,stv0299,td > > a8083,stv0297,sp8870,ves1x93,ttpci_eeprom,saa7134_dvb,mt352,saa7134,tda1004x > > psmouse 29956 0 > > reiserfs 223216 4 > > root@comp2:~# > > > > relevant section of: dmesg > > > > input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 > > Linux video capture interface: v1.00 > > saa7130/34: v4l2 driver version 0.2.14 loaded > > saa7130/34: snapshot date 2005-08-01 > > ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5 > > PCI: setting IRQ 5 as level-triggered > > ACPI: PCI Interrupt 0000:01: 09.0[A] -> Link [LNK2] -> GSI 5 (level, > > low) -> IRQ 5 > > saa7134[0]: found at 0000:01:09.0, rev: 1, irq: 5, latency: 32, mmio: > > 0xe7000000 > > saa7134[0]: subsystem: 185b:c900, board: UNKNOWN/GENERIC > > [card=0,autodetected] > > saa7134[0]: board init: gpio is 843f00 > > saa7134[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 > > saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff > > saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 87 ff ff ff ff > > saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > saa7134[0]: registered device video0 [v4l2] > > saa7134[0]: registered device vbi0 > > saa7146: register extension 'dvb'. > > Linux agpgart interface v0.101 (c) Dave Jones > > > > lspci: > > > > 01:09.0 Multimedia controller: Philips Semiconductors SAA7134 Video > > Broadcast Decoder (rev 01) > > > > In /lib/firmware there is: dvb-fe-tda10046.fw and dvb-ttpci-01.fw-261f > > and tda10046.bin > > > > In /usr/lib/hotplug/firmware there is the same 3 firmware files. > > I hacked the /etc/rc.d/rc.modules script to get the modules to load on > > boot as is shown by the lsmod readout. > > In /sys/class/firmware there is just the timeout file. > > I would like to use kaffeine-0.7.1 to watch tv as this has a DVB facility > > and i am having troubles with mysql that makes mythtv a challenge at this > > time. > > kaffeine does not recognize the DVB-T300. > > When i do "modprobe saa7134 oss=1" > > - do "modprobe saa7134-dvb" > > as suggested by Hartmut Hackmann nothing happens. > > Could anyone suggest where i am going wrong? > > Thanks, Ian. > > > > > > > > _______________________________________________ > > > > linux-dvb@xxxxxxxxxxx > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >
