I've found some weirdness with the firmware used for the Freecom DVB-t USB Stick device. Using the dvb-usb-dtt200u-01.fw firmware file (yes, I've checked the md5sums according to earlier messages) I get no success tuning and it causes my machine (nforce2-based Athlon) to do a full hardware lockup about 30 seconds after I stop attempting to tune the device. If I load the firmware through vmware and the included Windows application, I can use the device just fine from the Linux drivers (with a bit of module juggling, of course). So I'm wondering if perhaps this, rather new, device needs a slightly different firmware? From what I've read here, some people have got this device going without problems. I've had a hunt around on the included CD and inside the application's install directories under Windows for something that looks like the firmware, without any luck. Any suggestions on where I could find this? So, if someone could give me what you need to check the revision of the device, I'll send it through so we can diagnose working/non-working revisions.
