Vedran Rodic wrote: > Hi... > > Is this card supported? > > I'm getting one tomorrow, and will report back with detailed info if > it's not... Hi, this board has TDA8274, TDA10046HT and SAA7134HL. I've added the code in saa7134-cards.c to use it as Philips TOUGH DVB-T reference design, details saa7134[0]: subsystem: 1489:0301, board: Philips TOUGH DVB-T reference design [card=61,autodetected] saa7134[0]: board init: gpio is 10000 saa7134[0]: i2c eeprom 00: 89 14 01 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 01 03 08 ff 01 ec ff ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: registered device video0 [v4l2] saa7134[0]: registered device vbi0 DVB: registering new adapter (saa7134[0]). DVB: registering frontend 0 (Philips TDA10046H DVB-T)... I'm using the TDA10046 firmware extracted with ./get_dvb_firmware and I get this message when trying to tune: tda1004x: found firmware revision ff -- invalid tda1004x: firmware upload failed I would appreciate any help on this.... Thanks Vedran
