Yeah, I have a IR keyboard and trackball with sensor. When you press a keyboard key or move the mouse, the light flashes and it does the same when i press a button on the remote. I've just checked the plug and socket again. It was connected. I do have mythbackend running, but don't think this would make much difference. ---------------- Jon Burgess wrote: > Stephen Kirkby wrote: > >> When I cat /proc/bus/input/devices, the remote's entry has zero's for >> the bus, vendor, product and version - is this correct? I.e. >> >> I: Bus=0000 Vendor=0000 Product=0000 Version=0000 >> N: Name="Budget-CI dvb ir receiver saa7146 (0)" >> P: Phys= >> H: Handlers=kbd event2 >> B: EV=3 >> B: KEY=1b0c4004 31 0 0 0 0 18000 4180 4000801 9e1680 0 14000 50000ffc > > > I get something similar: > > I: Bus=0000 Vendor=0000 Product=0000 Version=0000 > N: Name="Budget-CI dvb ir receiver saa7146 (0)" > P: Phys= > H: Handlers=kbd event2 > B: EV=3 > B: KEY=1b0c4004 3100000000 0 18000 418004000801 9e168000000000 > 1400050000ffc > > Have you checked the other silly possibilities like the the IR sensor is > plugged into the card and there are good batteries in the remote. > > Also make sure that you don't have VDR running with the remote plugin > (since this captures all the input events and hides them from evtest). > > Jon > > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > >
